You may also like
Masonry Drill Bit XLong Dia 7/8" 6" Shank 1/2" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics BTT25 – Frequently Asked Questions
1) How deep can I drill with the BTT25 masonry bit?
It is an extra-long bit with a 6 inch dimension called out, so plan on anchor holes through brick, block or concrete in that depth range. For through-drilling a thicker wall than that, you need a longer bit, not this one.
2) Can I use the BTT25 in a rotary hammer for concrete anchor holes?
Only if the tool takes a straight 1/2 inch round shank. Most rotary hammers use SDS-Plus, SDS-Max or spline drive and will not grip this bit. In a 1/2 inch chuck hammer drill it works as intended for masonry.
3) Is the Metallics BTT25 sold individually or in a box of bits?
One bit per pouch. Order quantity equals number of bits, so if you want a spare on the truck for a 7/8 inch anchor run, order two.
4) What is a 7/8 inch masonry bit normally used for on an electrical job?
A 7/8 inch hole in block or concrete is the usual size for larger sleeve and wedge anchors and for pulling conduit or cable through a masonry wall. The BTT25 is the Metallics bit for that diameter, with the extra length to get through a wythe of brick or block rather than just a surface anchor hole.
5) Will the BTT25 drill steel or wood?
No. It is ground for masonry, brick, block and concrete. Running it in steel or driving it as a wood bit will dull the carbide tip and leave you with a ragged hole. Use a twist bit or auger for those materials.
How fast can I get the Metallics BTT25 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics BTT25 come with a warranty?
Absolutely. The Metallics BTT25 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics BTT25?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics BTT25 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.