McKinney TA2314 Non-Ferrous St...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$41.34
McKinney TA2314 Non-Ferrous Standard Weight 5 Knuckle Bearing Hinge

McKinney TA2314 Non-Ferrous Standard Weight 5 Knuckle Bearing Hinge

(No reviews yet) Write a Review

Model: TA2314-4.5X4.5-26D
$41.34
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$41.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
McKinney

McKinney is ASSA ABLOY’s line of high quality architectural hinges for commercial use. McKinney joined the ASSA ABLOY family of products in 1996. Under the ASSA ABLOY banner, we have greatly expanded the research and development, and manufacturing capabilities of this product line to have the most impact on improving custom hinge manufacturing.

Full Mortise Hinges
Full mortise hinges come in a variety of metals, finishes, sizes, and weights to meet all your load bearing and security applications. They include two, three, and five knuckle styles, swing clear hinges, wide throw hinges, anchor hinges, electric hinges, institutional hinges, and pivots.


The most common application is a flush door/frame/wall condition using a hollow metal frame with a standard hollow metal or wood door which is flush or 1/16" inset from the face of the frame, with a wall which is either flush (or inset from the
face of the frame. Recommended to hang door for 180Ëš swing: Full Mortise Hinge. The same hinge could be used with a wood or aluminum frame provided the door/frame/wall conditions are flush.

Oil Impregnated Bearing (TA)
One piece, non-ferrous, and self-lubricating bearings ensure even longer-lasting wear and resistance to clogging, corrosion, and hinge failure. This feature is standard and supplied on all five knuckle bearing hinges up to 5" height. All 6" or larger are Ball Bearing hinges.

RESOURCES & DOWNLOADS

McKinney Full Line Catalog

Manufacturer Resources

Product Specs

Subcategory:
Full Mortise Hinges
Knuckles:
5
Corner Style:
Square Corners
Fasteners:
Machine Screw: 1/2 in x #12-24; Wood Screw : 1-1/4 in x #12
Product Group:
Door Hinges and Pivots
Product Subgroup:
Full Mortise Hinges
Product Type:
Hinges
Features:
Recommended for Standard Weight, Medium Frequency Doors, or Doors With Closing Devices, Recommended to Hang Door for 180˚ Swing
Duty Level:
Medium Duty
Commercial/Residential:
Commercial
Product Model:
TA2314
Product Category:
Door Hinges and Pivots
Product Substrate:
Brass or Stainless Steel
Department:
Door Hardware

McKinney TA2314-4.5X4.5-26D – Frequently Asked Questions

1) What sizes does the McKinney TA2314 hinge come in?
Seven sizes: 3.5 x 3.5, 4 x 4, 4.5 x 4, 4.5 x 4.5, 5 x 4, 5 x 4.5, and 5 x 5 inches. The 4.5 x 4.5 covers most 1-3/4 inch commercial doors, and you go to a 5 inch height or a wider leaf when the door is heavier or thicker. Note that every size here is 5 inches or under, which is why it's an oil impregnated bearing hinge; McKinney supplies ball bearings on 6 inch and larger.
2) Will McKinney TA2314 hinges rust on an exterior or wet opening?
The TA2314 is non-ferrous, with a brass or stainless steel base, and the bearings are one piece self-lubricating units that resist clogging and corrosion. That's the reason to pick this over a plated steel hinge on a pool door, coastal exterior, kitchen, or wash-down area. A steel base hinge such as the Orca 3535 or Delaney CH401X is fine on a dry interior opening but is not the choice where moisture is the problem.
3) Are McKinney TA2314 hinges square corner or radius corner?
Square corners. That matches standard hollow metal frame and door prep, and it will not drop into an opening routed for a 5/8 inch or 1/4 inch radius corner without filling and re-prepping. For a radius opening, look at the Delaney residential hinges with a 5/8 inch radius or the Orca 4014 with a 1/4 inch radius corner.
4) How do I keep someone from pulling the hinge pin on an outswinging exterior door?
Order the TA2314 with the NRP option, non-removable pin. It's a selectable option on the hinge, and it's what you specify any time the hinge knuckles end up on the outside of the opening, typically an outswing exterior or a door opening into a corridor. On an inswing door where the pin is on the secure side, standard pin is fine.
5) The door is a heavy exterior slab with a closer and high traffic - what should be used instead of a McKinney TA2314?
The TA2314 is rated medium duty and is recommended for standard weight, medium frequency doors or doors with closing devices. When the leaf is heavy and the traffic is high, step up to a heavy duty hinge. The Don-Jo HWBB84545 is a heavy weight full mortise ball bearing hinge in 4-1/2 inch by 4-1/2 inch, and the Hager BB1168 is a heavy duty full mortise ball bearing hinge furnished with a non-removable pin, which also answers the outswing security requirement on an exterior opening. The Ives 3CB1HW is a heavy weight concealed bearing full mortise hinge if the specification calls for a concealed bearing rather than an exposed knuckle bearing.
6) Which hinge should be used instead of a McKinney TA2314 when power has to run through the hinge to an electrified lock?
The TA2314 is a mechanical bearing hinge with no wire path through the knuckle, so it cannot transfer power to an electric strike, electrified lever, or maglock. Use an electrified transfer hinge instead. The BEST CECB179-12C is a steel full mortise concealed bearing electrified hinge with a 12-wire quick connect at medium duty, which matches the duty class the TA2314 sits in. The Command Access ETH-CB70 is a 3 knuckle standard weight steel base energy transfer hinge, also medium duty, and the ETM-CB70 adds an integrated door position sensor if the opening also needs monitoring. Keep the TA2314 for the remaining non-electrified positions in the same opening.
7) What is the closest steel equivalent to the McKinney TA2314 for a standard weight commercial opening?
The TA2314 is a non-ferrous 5 knuckle bearing hinge in a brass or stainless steel base, medium duty, with square corners. The Stanley Security FBB191 is also a 5 knuckle full mortise standard weight hinge and is offered in 4.5 inch by 4.5 inch, a size the TA2314 also covers. The difference is the base material: the TA2314 runs brass or stainless steel, which is the reason to specify it on exterior or corrosion-prone openings, while the FBB191 is carried as a heavy duty rated hinge. If the opening only needs a square corner steel hinge at standard weight, the FBB191 covers it; if the door sits in a coastal, wet, or wash-down environment, stay with the non-ferrous TA2314.
8) Is a Deltana DSB35 or an Emtek 91013 an acceptable substitute for a McKinney TA2314 on an apartment corridor door?
They are not the same class of hinge. The TA2314 is a commercial hinge with a self-lubricating oil impregnated bearing in the knuckle, rated for medium frequency commercial traffic. The Emtek 91013 is a residential plain bearing hinge, 3-1/2 inch by 3-1/2 inch square corner plated steel, sold in pairs, and the Deltana DSB35 is a 3-1/2 inch by 3-1/2 inch residential square hinge, also sold in pairs. Plain bearing means there is no bearing element between the knuckles to carry the load, so those two belong on interior residential doors without closers. For a corridor door in a multi-family building that sees constant traffic or carries a closer, the bearing hinge is the one that holds up.
9) The frame is prepped with radius corners - can a McKinney TA2314 still be used?
No. The TA2314 is furnished with square corners, so it needs a square corner mortise in both the door and the frame. For an existing radius prep, the Orca Hardware 4014 Series is a 4 inch by 4 inch plain bearing commercial hinge with a 1/4 inch radius corner, and the Orca 3514 Series is the same in 3-1/2 inch by 3-1/2 inch. On the residential side, the Delaney exterior residential hinges are 4 inch by 4 inch with a 5/8 inch radius, which is a different radius again - confirm which radius the existing cutout was routed to before ordering, since 1/4 inch and 5/8 inch corners are not interchangeable.
10) Which hinges besides the McKinney TA2314 come with a non-removable pin for an outswing exterior door?
The TA2314 can be ordered with the NRP non-removable pin option, which is what keeps the pin from being driven out when the barrel is on the outside of an outswing door. Among other hinges, the Hager BB1168 is furnished as a non-removable pin full mortise ball bearing heavy duty hinge, and the Deltana CSB45N is a 4-1/2 inch by 4-1/2 inch square hinge sold in pairs with a non-removable pin. The Deltana DE44R5TA is a 4 inch by 4 inch security hinge with a 5/8 inch radius in steel, also sold in pairs, which addresses the same exposed-pin problem on a radius prep.
11) The existing hinge is half mortise into the frame - will a McKinney TA2314 replace it?
No. The TA2314 is a full mortise hinge, meaning both leaves mortise into the door and into the frame. A half mortise hinge mortises into the door but surface-mounts to a channel iron or angle frame, so the leaves are not interchangeable. The Hager 1129 is a half mortise plain bearing commercial hinge, 4-1/2 inch, standard weight steel, and is the pattern that matches that existing condition. Confirm which leaf is mortised on the door in place before ordering, because a full mortise hinge will not land on a half mortise frame prep.
12) Do McKinney TA2314 hinges come with screws for both hollow metal frames and wood doors?
Both are supplied. You get 1/2 inch #12-24 machine screws for the hollow metal frame side and 1-1/4 inch #12 wood screws for a wood door. So a hollow metal frame with a wood door needs no extra fasteners ordered.
13) What finishes do McKinney TA2314 hinges come in, and which one matches satin chrome lever sets?
Seven finishes: 605 bright brass, 606 satin brass, 613 satin bronze oil-rubbed, 625 bright chrome, 626 satin chrome, 630 satin stainless steel, and BSP black suede powder. For satin chrome trim, 626 is the match. If the rest of the building is 630 satin stainless, use 630 rather than 626; they read differently side by side on the same frame.
14) What is the difference between an oil impregnated bearing hinge and a ball bearing hinge?
The TA oil impregnated bearing is a one piece self-lubricating bearing, so there's nothing to grease and nothing for grit to pack into. McKinney supplies it as standard on five knuckle bearing hinges up to 5 inches in height, and goes to ball bearings at 6 inches and above. A ball bearing hinge like the Don-Jo HWBB74545 or the Hager BB1168 is the heavy duty route, for heavier doors and higher cycle openings.
15) Is a full mortise hinge the right type for my door, or do I need a half mortise or full surface hinge?
Full mortise, which is what the TA2314 is, mortises into both the door edge and the frame rebate. It's the right call on the common flush door, frame and wall condition, a hollow metal frame with a hollow metal or wood door flush or 1/16 inch inset from the frame face, and it's what hangs a door for a 180 degree swing. If the door can't be mortised, for example a metal-clad or existing door with no prep, that's when you go to a half mortise like the Hager 1129 or a full surface hinge like the Hager 990.
16) Can I standardize the whole building on the McKinney TA2314 hinge?
For standard weight commercial openings, yes. The TA2314 spans 3.5 x 3.5 up to 5 x 5 in one model and seven finishes, so interior office doors and heavier corridor doors can carry the same hinge model with only the size changing. Where it stops: high traffic entrances and heavy doors want a heavy weight hinge, electrified openings need a transfer hinge, and any opening prepped for radius corners won't take a square corner hinge without re-prep.
17) What is a simpler commercial hinge than the McKinney TA2314 for an interior office door with no closer?
The TA2314 carries a five knuckle oil impregnated bearing and a brass or stainless steel base, which is specified for medium frequency doors and doors with closing devices. On a low traffic interior door with no closer, a plain bearing commercial hinge does the job: the Orca Hardware 4040 Series is a 4 inch by 4 inch square corner plain bearing commercial hinge at medium duty, and the Orca 3514 Series is a 3-1/2 inch by 3-1/2 inch plain bearing commercial hinge with a 1/4 inch radius corner if the existing door and frame are prepped radius rather than square. Both sizes fall within the range the TA2314 covers, so the mortise prep matches on the square corner version.
18) What is the difference between the McKinney TA2314 and the Ives 3CB1 concealed bearing hinge?
Both are full mortise medium duty commercial hinges, but the bearing is handled differently. The TA2314 is a five knuckle hinge with the oil impregnated bearing sitting between the knuckles, so the bearing is visible in the barrel. The Ives 3CB1 is a three knuckle concealed bearing full mortise hinge, where the bearing is hidden inside the knuckle and the barrel reads as a plain smooth cylinder. That is an appearance and specification decision more than a performance one - many architectural specs call out concealed bearing by name. The other difference is base material: the TA2314 is non-ferrous brass or stainless steel, while the 3CB1 is steel.
19) Can a McKinney TA2314 be used on a detention or high-security opening?
No. The TA2314 is a medium duty full mortise hinge intended for standard weight, medium frequency doors. Detention openings call for hinges built for that use: the BEST BB855 is a heavy duty steel double weight concealed ball bearing prison hinge in the detention hardware series, the Stanley double weight prison hinge is furnished with no holes and not swaged in 5 inch by 6 inch, and the Hager 990 STEEL is a full surface prison hinge, 3 inch by 4 inch, with a welded tip. Note the Hager 990 is full surface, so it mounts to the face of the door and frame rather than into a mortise like the TA2314.
20) The door needs to self-close without a closer - is there an alternative to the McKinney TA2314?
The TA2314 is a bearing hinge with a free-swinging pin; it carries the door but does not return it. For an opening that has to close on its own without a surface closer, the Stanley Security 2060R spring hinge is a heavy duty full mortise spring hinge with square corners in 4.5 inch by 4.5 inch on a ferrous steel base. The square corner and the 4.5 inch by 4.5 inch size match a prep the TA2314 also fits, so it can go into an existing cutout. Keep in mind the 2060R is a ferrous steel base rather than the non-ferrous brass or stainless the TA2314 uses.
21) What should be specified instead of a McKinney TA2314 on a door that needs to swing both directions?
The TA2314 is a full mortise hinge recommended to hang a door for a 180 degree swing in one direction; it will not carry a door that swings both ways. For a double acting interior opening, the BEST DAP-3 is a heavy duty double acting pivot for commercial interior doors. That is a pivot rather than a hinge, so the door and frame need pivot preparation at the top and bottom rather than the mortise cutouts the TA2314 uses - it is not a drop-in swap into an existing hinge prep.
22) Is the Delaney CH401X commercial ball bearing hinge the same thing as a McKinney TA2314?
They are close in intent but not identical. The Delaney CH401X is a 4 inch by 4 inch commercial ball bearing hinge with square corners, and the TA2314 is offered in 4 inch by 4 inch with square corners as well, so the door and frame prep lines up. The difference is the bearing and the base: the TA2314 uses a one-piece non-ferrous oil impregnated self-lubricating bearing on a brass or stainless steel base, while the CH401X is a ball bearing hinge. Where the spec or the environment drives the choice - a self-lubricating bearing that resists clogging and corrosion, or a non-ferrous base - the TA2314 is the one that answers it.
23) What matches a McKinney TA2314 for a 3-1/2 inch square corner opening on a light commercial door?
The TA2314 is offered in 3.5 inch by 3.5 inch with square corners, in finishes including 626 satin chrome and 630 satin stainless steel. If the requirement is a lighter, simpler hinge at that same size and corner, the Emtek 92013 is a heavy duty plain bearing hinge, 3-1/2 inch by 3-1/2 inch with square corners in plated steel, sold in pairs, and the Emtek 94013 is a heavy duty ball bearing hinge in the same 3-1/2 inch square corner size. The Schlage Residential S3P1010 is a 3.5 inch by 3.5 inch square corner plain bearing mortise hinge sold three to a pack, which suits a door hung on three hinges. All three share the square corner prep the TA2314 uses at that size.
24) For standardizing hinges across a facility, what covers the openings a McKinney TA2314 does not?
The TA2314 covers the medium duty standard weight range from 3.5 inch by 3.5 inch through 5 inch by 5 inch with square corners, in a brass or stainless steel base, and finishes including 605 bright brass, 626 satin chrome and 630 satin stainless steel. Around that core, the Don-Jo HWBB75045 covers heavy weight full mortise ball bearing at 5 inch by 4-1/2 inch, the Ives 3CB1HW covers heavy weight where the spec calls for concealed bearing, the BEST CECB179-12C covers the electrified openings, and the Stanley 2060R covers a self-closing 4.5 inch by 4.5 inch opening. Holding the TA2314 as the standard and those four as exceptions keeps one finish family and one corner style across the building.
25) Are McKinney TA2314 hinges sold individually or in pairs?
The TA2314 is ordered by the individual hinge, with size and finish selected per hinge, unlike the residential hinges that ship as a pair, such as the Deltana DSB35 or Emtek 91013. Standard practice on a commercial door is three hinges per leaf, so order accordingly.
How fast can I get the McKinney TA2314-4.5X4.5-26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the McKinney TA2314-4.5X4.5-26D come with a warranty?
Absolutely. The McKinney TA2314-4.5X4.5-26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the McKinney TA2314-4.5X4.5-26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the McKinney TA2314-4.5X4.5-26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!