Midwest Fasteners Full-Length Thread Bronze Steel Phillips Flat Head Tapping Screw

Midwest Fasteners Full-Length Thread Bronze Steel Phillips Flat Head Tapping Screw

The Midwest Fasteners Phillips Flat Head Tapping Screw is a steel fastener finished in bronze, offered across the #6 x 1/2" to #6 x 1" size range with full-length threading on every option in the family. This configuration self-taps into pre-drilled holes in sheet metal, wood, or soft materials where a flush-sitting flat head is required for a clean finished surface. The Phillips drive accepts standard bits and drivers for reliable hand or power driving, and the bronze finish gives the screw a decorative, corrosion-resistant surface compared to bare or bright-zinc steel. Pick the #6 length that matches your project from the available range, since every size shares the same bronze finish, flat Phillips head, and full-length thread.

Key Features

• Size Range: Available from #6 x 1/2" up to #6 x 1", each length built with full-length thread for consistent engagement across the entire shank.
• Material & Finish: Steel construction with a bronze finish for a decorative, corrosion-resistant surface on every size in the range.
• Head & Drive: Phillips Flat Head sits flush with the work surface and accepts standard Phillips bits and drivers.
• Thread: Full-length threading delivers tapping screw holding power along the entire shank regardless of the selected length.
• Type: Tapping screw configuration for self-threading into pre-drilled holes in sheet metal, wood, or soft materials.

Technical Specifications

• Product Material: Steel
• Finish: Bronze
• Drive Type: Phillips
• Head Style: Flat
• Thread Length: Full
• Product Type: Tapping Screw
• Size Range: #6 x 1/2" - #6 x 1"

Typical Applications

• Fastening sheet metal panels and brackets that need a flush-mounted head.
• General repair and maintenance work on cabinetry, enclosures, and fixtures.
• Attaching hardware to wood or light-gauge metal where a decorative bronze finish is preferred over bright zinc or plain steel.
• Shop and jobsite assembly tasks calling for a self-tapping flat head screw in a specific #6 length.

Why Midwest Fasteners?

Midwest Fasteners builds this tapping screw in steel with a bronze finish and full-length threading, giving contractors and maintenance techs a consistent flat-head Phillips fastener across the entire #6 x 1/2" to #6 x 1" size range. The flush-sitting flat head and bronze finish make it a dependable choice when appearance and corrosion resistance matter alongside solid self-tapping performance, no matter which length in the range you need for the job at hand.