Midwest Fasteners Steel Clevis Pins with Zinc-Plated Finish

Midwest Fasteners Steel Clevis Pins with Zinc-Plated Finish

Midwest Fasteners Steel Clevis Pins with Zinc-Plated Finish are a family of steel pins built for securing a clevis fork to a mating part while allowing rotation at the joint. This clevis pin line is available in sizes ranging from 1/4" x 2" up to 3/4" x 3", including 1/2" x 2-1/2", 1/2" x 3", 5/16" x 2", 5/8" x 3", 7/16" x 2", 7/16" x 2-1/2", and 7/16" x 3", so maintenance techs and fabricators can match the pin diameter and length to the clevis or yoke hardware on hand. Every pin in the family is steel construction finished in zinc plating for corrosion resistance, and each pin is intended to be retained with a cotter pin or hairpin clip through its cross-drilled end. This family is a practical stock option for nearly any standard clevis joint repair across equipment, trailers, and machinery linkages. Select the size option on this listing that corresponds to your specific clevis joint.

Key Features

• Size Range: Available from 1/4" x 2" through 3/4" x 3", with options at 5/16" x 2", 7/16" x 2", 7/16" x 2-1/2", 7/16" x 3", 1/2" x 2-1/2", 1/2" x 3", and 5/8" x 3" to fit standard clevis and yoke assemblies.
• Material & Finish: Steel construction with a zinc-plated finish for corrosion resistance in general shop and outdoor use.
• Type: Clevis pin designed to pass through a clevis fork and mating eye, creating a pivoting or removable connection.
• Retention: Cross-drilled end accepts a cotter pin or hairpin clip to retain the pin in the joint.
• Universal Fit: Sized for common clevis hardware applications across equipment, trailers, and linkage assemblies.
• Shop-Ready: A broad size range on one listing reduces the need to special-order a single clevis pin size.
• Multiple Options: Choose the size that matches your specific clevis or yoke hardware from the options on this listing.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Trailer hitch and tow linkage connections
• Equipment and implement clevis-and-yoke joints
• Pivoting linkage assemblies on machinery and attachments
• General maintenance and repair where a removable pivot pin is needed

Why Midwest Fasteners?

Midwest Fasteners builds this clevis pin family from steel with a consistent zinc-plated finish, giving maintenance techs and fabricators a dependable, correctly sized pin for clevis-style connections regardless of which size the job requires. Whether you need a short 1/4" pin for light-duty linkage or a heavier 3/4" pin for towing hardware, the same steel construction and zinc-plated finish carry through the entire range. Consistent sizing and finish across the full 1/4" x 2" to 3/4" x 3" range mean these pins are ready to stock as a direct fit for standard clevis hardware repairs on trailers, equipment, and machinery linkages.