Midwest Fasteners Zinc Plated Steel Spring-Style Hitch Pin Clip

Midwest Fasteners Zinc Plated Steel Spring-Style Hitch Pin Clip

The Midwest Fasteners Zinc Plated Steel Spring-Style Hitch Pin Clip is a steel, zinc-plated pin retainer available across four wire diameter and length combinations: 1/4" x 4-3/8", 3/16" x 3-3/4", 3/16" x 3-1/4" and 3/32" x 2-1/2", so you can match the clip to the hitch pin or clevis pin on hand. This spring-style clip locks into the cross-drilled hole of a hitch pin or clevis pin to keep it from backing out under vibration and load on trailers, towing equipment, implements and general fabrication work. Every size in the lineup shares the same steel construction and zinc-plated finish for corrosion resistance in outdoor and jobsite exposure.

Key Features

• Size Range: Available in 1/4" x 4-3/8", 3/16" x 3-3/4", 3/16" x 3-1/4" and 3/32" x 2-1/2", covering common hitch pin and clevis pin diameters.
• Material & Finish: Steel construction with a zinc-plated finish for corrosion resistance in outdoor and towing applications.
• Type: Spring-style hitch pin clip retainer that seats in the cross-drilled hole of a hitch pin or clevis pin to prevent it from working loose.
• Function: Spring action allows quick hand installation and removal without tools while still holding securely under vibration.
• Compatibility: Works as a companion retainer for hitch pins, clevis pins and similar rod-style pins common in towing, agricultural and fabrication hardware.
• Consistent Sizing: Each size option is held to the same dimensional and finish standards for reliable seating every time.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Securing hitch pins on trailer couplers and receiver-style towing setups.
• Retaining clevis pins on agricultural implements and tow chains.
• General equipment pin retention where a removable, reusable clip is preferred over a cotter pin.
• Fabrication and maintenance shop hardware stock for quick pin-and-clip repairs across multiple pin sizes.

Why Midwest Fasteners?

Midwest Fasteners builds this hitch pin clip line from steel with a zinc-plated finish, giving contractors, fleet maintenance techs and fabricators a dependable, corrosion-resistant retainer across the full size range from 3/32" x 2-1/2" up to 1/4" x 4-3/8". Consistent sizing and finish matter when a pin retainer has to seat correctly every time, whether it is holding a trailer hitch together on the road or securing a clevis pin on an implement in the field. Stock the Midwest Fasteners hitch pin clip family for reliable pin retention across towing and general maintenance work.