Midwest Fasteners Straight Drive-In Zinc Plated Steel Grease Fittings
Midwest Fasteners offers this zinc plated steel straight drive-in grease fitting as a family spanning 1/4", 3/16", and 5/16" bore sizes, giving maintenance techs and fabricators a dependable press-fit lubrication point for machinery, equipment, and fabricated assemblies. Rather than threading into a port, the straight drive-in configuration presses directly into a pre-drilled bore and seats flush against the housing wall, delivering a low-profile grease access point that accepts a standard grease gun coupler without the clearance issues common to angled or threaded fittings. Every size in this family shares the same steel body with a zinc plated finish, which resists corrosion in shop and field environments while standing up to repeated greasing cycles. Each fitting is precision sized to the bore it is designed to be driven into, so techs select the 1/4", 3/16", or 5/16" option to match the application at hand.
Key Features
- Size Range: Available in 1/4", 3/16", and 5/16" drive-in bore diameters for a secure press fit into the housing.
- Material & Finish: Steel construction with a zinc plated finish for corrosion resistance in shop and jobsite environments.
- Configuration: Straight drive-in design seats flush into a pre-drilled hole rather than threading in, simplifying installation on equipment where a threaded port isn't practical.
- Type: Grease fitting designed to accept a standard grease gun coupler for routine lubrication service.
- Durable Body: Zinc plating helps the fitting resist rust from grease purge-out and ambient moisture over repeated lubrication cycles.
- Consistent Sizing: Each size in the family is precision sized to its matching bore, so techs can standardize on the same drive-in design across multiple bore diameters.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Replacing worn or damaged grease fittings on bearings, bushings, and pivot points.
- Equipping fabricated brackets, linkages, and machine housings with a dedicated lubrication point during assembly.
- Maintenance and repair of industrial, agricultural, and off-road equipment requiring periodic greasing.
- General machine hardware builds where a press-fit lubrication fitting is preferred over a threaded port.
Why Midwest Fasteners?
Midwest Fasteners supplies consistently sized, correctly finished machine hardware so maintenance techs and fabricators get a grease fitting that fits the bore and performs the first time, in whichever of the 1/4", 3/16", or 5/16" sizes the job calls for. The zinc plated steel construction across this drive-in family is built for repeated use in demanding shop and field conditions, making it a dependable, corrosion-resistant choice for routine equipment lubrication work on machinery, fabricated assemblies, and off-road or industrial gear alike.
Manufacturer Resources
Product Specs
- Product Type:
- Grease Fitting
- Product Finish:
- Zinc-Plated
- Configuration:
- Straight Drive-In
- Department:
- Fasteners
- Product Group:
- Fastener Tools and Accessories
- Product Subgroup:
- Machine Hardware
- Product Material:
- Steel
- Product Size:
- 5/16"