Midwest Fasteners Zinc Plated Steel Hex Head Hammer Drive Anchor

Midwest Fasteners Zinc Plated Steel Hex Head Hammer Drive Anchor

The Midwest Fasteners Hammer Drive Anchor is a zinc plated steel fastener with a yellow zinc finish, engineered for securing fixtures, brackets, and equipment directly into concrete and masonry. This hex head anchor family is available in diameters from 1/4" through 1/2" and lengths from 1-3/4" up to 4-3/4", giving contractors and maintenance crews the flexibility to match anchor size to the substrate and load on the job. Every size in the lineup shares the same hex head configuration and zinc plated steel body, and each anchor includes a matching nut and washer so installers get consistent quality across the full range.

Key Features

• Size Range: Available from 1/4" x 1-3/4" through 1/2" x 4-3/4", covering 1/4", 3/8", and 1/2" diameters across eight length and diameter combinations.
• Material & Finish: Zinc plated steel construction with a yellow zinc finish for corrosion resistance in indoor and outdoor masonry applications.
• Configuration: Hex head design across every size, giving installers a solid wrenching surface for driving and seating the anchor into pre-drilled holes.
• Included Hardware: Each anchor ships with a matching nut and washer so the fastener is ready to install without sourcing separate hardware.
• Type: Hammer drive anchor engineered for quick-set anchoring into concrete and masonry substrates.
• Origin: Manufactured in Taiwan.

Technical Specifications

• Product Type: Hammer Drive Anchor
• Product Finish: Yellow Zinc
• Configuration: Hex Head
• Country of Origin: Taiwan
• Product Material: Zinc Plated Steel
• Anchor Size Range: 1/4" x 1-3/4" to 1/2" x 4-3/4" (8 size options)

Typical Applications

• Anchoring fixtures, brackets, and hardware directly into concrete or masonry walls.
• Mounting electrical boxes, conduit straps, or equipment supports to concrete surfaces.
• Securing shelving, frames, and track systems to masonry and block construction.
• General maintenance and jobsite anchoring where a hammer-set anchor with included nut and washer is needed.
• Selecting the right diameter and length from the range for light-duty to heavier fixture attachment.

Why Midwest Fasteners?

Midwest Fasteners supplies this hammer drive anchor family as complete zinc plated steel assemblies with a yellow zinc finish, with a matching nut and washer included on every size, so contractors and maintenance techs get consistent sizing and finish quality without hunting down matching hardware. With diameters spanning 1/4" through 1/2" and lengths up to 4-3/4", and a hex head configuration throughout, this lineup is built for dependable masonry anchoring on professional jobsites.