Midwest Fasteners Zinc Plated Steel Truss Head Nail Drive Expansion Anchor
The Midwest Fasteners Nail Drive Expansion Anchor is a truss head concrete and masonry anchor built from steel with a zinc plated finish for corrosion resistance in everyday jobsite conditions. This anchor family is available in 1/4" diameter sizes ranging from 1/4" x 1" up to 1/4" x 3", including 1/4" x 1-1/4", 1/4" x 1-1/2", 1/4" x 2", and 1/4" x 2-1/2" lengths, so installers can match anchor length to the anchoring depth a given job requires. The nail drive design expands the anchor sleeve as the nail is set, locking the fastener into pre-drilled concrete, block, or brick without a separate nut or washer, for a fast, one-step installation.
Key Features
- Size Range: 1/4" diameter nail drive anchors from 1/4" x 1" to 1/4" x 3" in length, including 1/4" x 1-1/4", 1/4" x 1-1/2", 1/4" x 2", and 1/4" x 2-1/2" options.
- Material & Finish: Steel construction with a zinc plated finish for added corrosion resistance over bare steel.
- Head Type: Truss head design provides a wide, low-profile bearing surface that resists pull-through while keeping the installed anchor flush against the work surface.
- Expansion Action: Nail drive style expands the sleeve as the nail is driven, locking the anchor into concrete or masonry in a single step with no nut or washer required.
- Product Type: Classified as an expansion anchor, suited to general concrete and masonry anchoring tasks across jobsite and maintenance applications.
- Installation: Designed to set into pre-drilled holes in concrete, block, or brick for quick, repeatable anchoring.
Technical Specifications
- Product Type: Expansion Anchor
- Product Material: Steel
- Finish: Zinc Plated
- Head Style: Truss Head
- Anchor Size Range: 1/4" x 1" through 1/4" x 3"
- Country of Origin: China
Typical Applications
- Anchoring brackets, fixtures, and hardware to concrete or masonry walls
- Fastening furring strips, trim, or light framing members to block or brick
- Securing conduit straps or mounting plates to masonry surfaces
- General maintenance and repair work requiring a quick-set concrete anchor
- Projects needing a range of anchor lengths from short 1" anchors to longer 3" anchors for varying material thicknesses
Why Midwest Fasteners?
Midwest Fasteners builds this nail drive anchor family from steel with a zinc plated finish, giving contractors and maintenance crews a consistent, corrosion-resistant anchor for concrete and masonry work across the full 1/4" x 1" to 1/4" x 3" size range. The truss head design and nail-drive expansion mechanism keep installation simple and repeatable, so crews get uniform sizing and finish from batch to batch no matter which length in the lineup they select for a given job.
Manufacturer Resources
Product Specs
- Product Type:
- Expansion Anchor
- Product Finish:
- Zinc
- Country of Origin:
- China
- Department:
- Fasteners
- Product Group:
- Anchors
- Product Subgroup:
- Concrete and Masonry Anchors
- Head Type:
- Truss
- Product Material:
- Steel