Midwest Fasteners Zinc Plated Steel Combo Round Head Toggle Bolt

Midwest Fasteners Zinc Plated Steel Combo Round Head Toggle Bolt

Midwest Fasteners Zinc Plated Steel Combo Round Head Toggle Bolts are coarse thread hollow wall anchors designed to hang items securely on drywall, plaster, and other hollow wall surfaces where no stud is available. This family is available in anchor sizes ranging from #6-32 x 2" up through 1/4"-20 x 5", including #6-32 x 3", #6-32 x 4", #10-24 x 2", #10-24 x 3", 5/16"-18 x 3", 1/4"-20 x 3", and 1/4"-20 x 4", so installers can match the toggle bolt to the specific fastening job at hand. Each size is offered in Box, Carded Pack, or Each package options to suit contractor bulk needs or retail single-unit purchases. Finished in zinc plated steel for corrosion resistance, the combo round head accepts either a Phillips or slotted driver, and the spring-loaded wings open behind the wall surface to distribute load across a wider area than a standard screw anchor alone could manage.

Key Features

• Anchor Size Range: Available across the family from #6-32 x 2" and #6-32 x 3" up through #10-24 x 2", #10-24 x 3", 5/16"-18 x 3", and 1/4"-20 x 3", 1/4"-20 x 4", and 1/4"-20 x 5" to match the application.
• Material & Finish: Zinc plated steel construction provides corrosion resistance and long-term durability in interior applications.
• Head & Drive: Round head with a combo drive accepts Phillips or slotted bits, giving installers flexibility with whatever driver is on hand.
• Thread: Coarse thread construction for reliable engagement with the toggle wing mechanism across every size in the family.
• Type: Toggle bolt style hollow wall anchor, with spring-loaded wings that open after insertion to spread the mounting load across the back side of the wall.
• Package Options: Sold as Box, Carded Pack, or Each, letting contractors buy bulk or retail buyers purchase single units.
• Color: Silver finish that blends in with most hardware and fixture finishes.
• Country of Origin: Manufactured in Taiwan.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Hanging shelving, brackets, and hooks on drywall or plaster where no stud is available.
• Mounting mirrors, picture frames, and light fixtures to hollow wall surfaces.
• Securing curtain rods, towel bars, and other bathroom or bedroom fixtures.
• General hollow wall anchoring tasks on maintenance and remodeling jobs.

Why Midwest Fasteners?

Midwest Fasteners toggle bolts are built from zinc plated steel for consistent corrosion resistance and dependable performance on hollow wall mounting jobs. The combo round head design gives contractors and maintenance techs flexibility on the jobsite, accepting common Phillips or slotted drivers without requiring a specialty bit. With nine anchor sizes and three package options across the family, consistent coarse thread engagement and spring-loaded wing action make these toggle bolts a practical choice whenever a stud isn't available for a secure anchor point.