"Milbank 444-SC1 NEMA 1 Powder...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$11.84
"Milbank 444-SC1 NEMA 1 Powder-Coated Steel Screw Cover Junction Box, 4-Inch x 4-Inch x 4-Inch, ANSI 61 Gray"

"Milbank 444-SC1 NEMA 1 Powder-Coated Steel Screw Cover Junction Box, 4-Inch x 4-Inch x 4-Inch, ANSI 61 Gray"

(No reviews yet) Write a Review

Model: 444-SC1

In Stock (leaves warehouse same day if ordered before 3pm ET)

$11.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Milbank 444-SC1 NEMA 1 Powder-Coated Steel Screw Cover Junction Box, 4-Inch x 4-Inch x 4-Inch, ANSI 61 Gray

The Milbank 444-SC1 is a NEMA 1 rated screw cover junction box constructed of polyester powder coated steel, sized at 4-Inch x 4-Inch x 4-Inch and finished in ANSI 61 Gray. Built for general-purpose indoor electrical wiring, this compact enclosure provides a protected space for splicing, routing, and terminating conductors, while the removable screw cover gives electricians quick, secure access for installation and future maintenance. The rugged steel body and durable powder coated finish are engineered to hold up to everyday conditions in commercial, industrial, and residential electrical rooms.

Key Features

  • Trade Size: Compact 4-Inch x 4-Inch x 4-Inch enclosure dimensions fit standard junction box layouts and tight wiring spaces.
  • Durable Construction: Polyester powder coated steel body resists corrosion and everyday wear for long service life in indoor electrical installations.
  • Screw Cover Access: Removable, screw-secured cover allows convenient access to wiring and terminations while keeping the enclosure fully closed during normal operation.
  • NEMA 1 Rating: Rated for general-purpose indoor use, shielding enclosed conductors and connections from incidental contact and light dust accumulation.
  • Finish: ANSI 61 Gray polyester powder coat provides a clean, uniform, professional appearance suited to commercial and industrial electrical environments.
  • Versatile Enclosure Design: Compact square footprint supports use as a pull box, junction point, or splice enclosure within larger conduit and raceway systems.

Certifications & Compliance

  • NEMA 1 Rated Enclosure

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Indoor Electrical Wiring Junctions
  • Conductor Splicing and Pass-Through Enclosures
  • Commercial and Industrial Wiring Systems
  • General-Purpose Indoor Electrical Panels and Rooms
  • Conduit and Raceway Pull Points
  • New Construction and Electrical Retrofit Projects

Why Milbank?

Milbank builds the 444-SC1 junction box from polyester powder coated steel to deliver a rugged, NEMA 1 rated enclosure suited to everyday indoor electrical work. The screw cover design keeps installation and maintenance straightforward, while the ANSI 61 Gray finish delivers a durable, professional appearance for commercial and industrial electrical environments. Choose Milbank for dependable, code-appropriate junction box solutions that electrical contractors can install with confidence.

"

Manufacturer Resources

Product Specs

list_batch:
MIL-20260917
Product Type:
Junction Box
Product Finish:
Polyester Powder-Coated
Standards:
NEMA 1
Configuration:
Screw Cover
Department:
Electrical
Product Subgroup:
Electrical Boxes
Product Material:
Steel
Product Color:
ANSI 61 Gray
Product Group:
Boxes & Enclosures
Product Length:
4 in
Product Height:
4 in
Product Width:
4 in

Milbank 444-SC1 – Frequently Asked Questions

1) What should I use instead of the Milbank 444-SC1 if the junction box is going outdoors or getting washed down?
The Milbank 444-SC1 carries a NEMA 1 rating, which covers general-purpose indoor use only. For a wet, outdoor, or washdown location, step to the Rittal 80181 JB Series hinged-cover junction box, which is rated IP66/NEMA 4X. The hinged cover on the Rittal also means the lid stays captive when you open it, rather than coming off as a separate screw-on piece.
2) Is there a non-metallic alternative to the Milbank 444-SC1 screw cover junction box?
Yes. The Milbank 444-SC1 is a steel box with a polyester powder-coated finish. If you want a non-metallic enclosure for a corrosive or damp-prone area, the Carlon E987R is a polycarbonate screw-cover junction box measuring 6 inches by 6 inches by 4 inches, and the Cantex E983G family is non-metallic PVC. Both avoid the grounding and corrosion considerations that come with a steel body, though the Carlon is a larger footprint than the 4 by 4 by 4 inch Milbank.
3) What size is the Milbank 444-SC1 junction box inside?
It is a 4 x 4 x 4 inch steel box, so it is a full 4 inch deep cube rather than a shallow 4 inch square box. That extra depth is what makes it workable as a splice or pull point for several conduit runs instead of just a device box.
4) Is a screw cover box better than a hinged cover for a junction I need to open often?
A screw cover like the 444-SC1 stays fully closed in service and comes off with its screws when you need access, which suits a splice or pull point you touch at install and then rarely again. If the box is a terminal point you open routinely, a hinged cover saves you chasing loose screws, and the Rittal 80181 JB Series is a hinged-cover junction box.
5) Should I use a steel junction box or a PVC one for an indoor splice?
Steel, like the Milbank 444-SC1, takes impact and supports conduit better and bonds as part of a metallic raceway system. Non-metallic boxes are the choice where you want no corrosion path or no bonding of the enclosure: ZenSupply carries the Carlon E987R polycarbonate screw-cover box at 6 x 6 x 4 inches and the Cantex E983G non-metallic PVC junction box family.
6) I need more room than a 4x4x4 box gives me for conductor fill. What is the next step up?
If the 444-SC1's 4 x 4 x 4 inch volume won't take your conductor count, step to a larger screw-cover box such as the Carlon E987R at 6 x 6 x 4 inches. Going the other direction, for a shallower square box the Orbit D4SB series is a 1-1/2 inch deep 4 inch square box in drawn steel, sold 100 to a pack.
7) What is the closest equivalent to the Milbank 444-SC1 in a 4-inch square steel box?
Among 4-inch square steel boxes, the Orbit 4SDB Series square deep box is welded steel with 1-inch knockouts, and the Orbit D4SB Series is a 1-1/2 inch deep drawn-steel 4-inch square box sold in packs of 100. The Milbank 444-SC1 differs in depth and cover style: it is a 4 by 4 by 4 inch enclosure with a removable screw cover, where the Orbit boxes are shallower device-style squares typically covered with a separate 4-inch square plate.
8) I need a junction box with a knockout and cover already included - does the Milbank 444-SC1 come that way, or is there a simpler option?
The Milbank 444-SC1 ships as a screw cover enclosure, so the cover is part of the box. If you want a smaller non-metallic unit that arrives with both a knockout and cover, the Cantex 5133690 is a 4-1/8 inch junction box supplied with a 1/2 inch knockout and a cover. The Milbank is the steel choice of the two and is finished in ANSI 61 Gray powder coat for electrical room appearance.
9) Can I use an Orbit D4SB square box in place of a Milbank 444-SC1 as a conduit pull point?
They are not interchangeable for the same job. The Orbit D4SB is a 1-1/2 inch deep drawn-steel 4-inch square box, so it offers far less interior volume for conductor bending space than the 4-inch deep Milbank 444-SC1, which is sized to serve as a pull box, junction point, or splice enclosure within conduit and raceway systems. The D4SB is also sold in packs of 100 for device and fixture work, while the 444-SC1 is a single screw cover enclosure.
10) If I need more room than the Milbank 444-SC1 for splices, what larger screw-cover box is available?
The Milbank 444-SC1 is 4 inches by 4 inches by 4 inches. For more splice room in the same screw-cover style, the Carlon E987R measures 6 inches by 6 inches by 4 inches. The trade-off is material: the Carlon body is polycarbonate, while the Milbank is powder-coated steel.
11) Will the gray finish on the Milbank 444-SC1 match the other enclosures in my electrical room?
The finish is ANSI 61 Gray polyester powder coat, the standard gray used across most switchgear, panelboards, and industrial enclosures, so it lines up visually with the rest of a typical electrical room. The powder coat also gives the steel body corrosion resistance for indoor service.
12) What part number do I order for the Milbank 4x4x4 screw cover junction box?
Order Milbank 444-SC1. That is the single model for this box, so there are no finish or size options to specify at the order stage: the 4 x 4 x 4 inch steel body in ANSI 61 Gray is what ships.
How fast can I get the Milbank 444-SC1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milbank 444-SC1 come with a warranty?
Absolutely. The Milbank 444-SC1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milbank 444-SC1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milbank 444-SC1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!