Milbank U5168-XTL-200-KK 200A ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$563.91
Milbank U5168-XTL-200-KK 200A Ringless Meter Main with Horn Bypass Load Center Combo - 1-Phase, 8-Circuit, Surface Mount, open interior view showing meter socket and main breaker

Milbank U5168-XTL-200-KK 200A Ringless Meter Main Combo with 8-Circuit Load Center, G90 Galvanized Steel, Type 3R Enclosure

(No reviews yet) Write a Review

Model: U5168-XTL-200-KK-PL

In Stock (leaves warehouse same day if ordered before 3pm ET)

$563.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Milbank U5168-XTL-200-KK 200A Ringless Meter Main Combo with 8-Circuit Load Center, G90 Galvanized Steel, Type 3R Enclosure

The Milbank U5168-XTL-200-KK 200A Ringless Meter Main Combo pairs a 4-terminal ringless meter socket with a single 200A main breaker and an 8-circuit load center in one surface-mount enclosure, purpose-built for 1-Phase, up to 240 Volts Alternating Current service entrance applications. Constructed from G90 galvanized steel with a powder coat finish inside a Type 3R rated enclosure, this combo unit is engineered to withstand outdoor exposure while streamlining service equipment installation by combining metering, main disconnect, and branch circuit distribution into a single surface-mount cabinet. The unit accepts overhead or underground service entry through twin small hub closing plates and provides a generous 6 AWG-350 kcmil lay-in wire range on both line and load sides for straightforward conductor termination with 4 terminations and glass polyester insulation. It is UL Listed for outdoor use, giving contractors and utilities a code-compliant solution for residential and light commercial service upgrades. Overall product size measures 4.5L x 14.125W x 30H, sized for a straightforward surface-mount installation at the point of service entrance.

Key Features

  • 200A Ringless Meter Main: Combines a 4-terminal ringless meter socket with a single 200 Ampere main breaker for 1-Phase, up to 240 Volts Alternating Current service, eliminating the need for separate metering and disconnect equipment.
  • Horn Bypass Provision: Allows the utility to maintain service continuity during meter removal without interrupting power to the customer's load center.
  • 8-Circuit Load Center: Integrated branch circuit distribution with 8 branch circuit positions eliminates the need for a separate panelboard, simplifying the overall service entrance footprint.
  • Overhead or Underground Entry: Twin small hub closing plates accommodate either overhead or underground service drop configurations for flexible field installation.
  • Lay-In Terminals: A 6 AWG-350 kcmil wire range on both line and load sides, with 4 terminations and glass polyester insulation, simplifies conductor termination for installers.
  • Ground Bar Included: Factory-installed ground bar supports proper equipment grounding per code requirements.
  • G90 Galvanized Steel, Type 3R Enclosure: Powder coat finish over G90 galvanized steel construction, housed in an outdoor-rated Type 3R enclosure, resists corrosion in exposed, weather-prone installations.
  • Surface Mount Installation: Designed for straightforward surface mounting at the point of service entrance.

Certifications & Compliance

  • UL Listed
  • Type 3R Rated Enclosure

Technical Specifications

  • Application: Meter Socket With Main And Load Center
  • Frequency Rating: 60 Hertz
  • Line Side Wire Range: 6 AWG - 350 kcmil
  • Load Side Wire Range: 6 AWG - 350 kcmil
  • Main Breaker Size: One 200 Ampere Main Breaker
  • Number Branch Circuits: 8
  • Number Of Main Breakers: 1
  • Number Of Meter Positions: 1 Position
  • Number Of Receptacles: 0
  • Phase: 1 Phase
  • Product Size: 4.5L x 14.125W x 30H
  • Standards: UL Listed; Type 3R
  • Terminal Type: Lay In
  • Voltage Rating: Up to 240 Volts Alternating Current
  • Amps: 200
  • Number of Terminations: 4
  • Insulation Type: Glass Polyester
  • Hub Style: Twin Small Closing Plates
  • Equipment Ground: Ground Bar
  • Installation Category: Surface Mount

Typical Applications

  • Residential Service Entrance Installations
  • Light Commercial Electrical Service Entrances
  • Combined Metering and Branch Circuit Distribution
  • Outdoor and Type 3R Rated Installations
  • New Construction and Service Upgrades

Why Milbank?

Milbank builds the U5168-XTL-200-KK from G90 galvanized steel with a powder coat finish inside a Type 3R enclosure rated for outdoor exposure, backed by UL Listing for code-compliant performance. The horn bypass provision, integrated 8-circuit load center, and lay-in terminal design reflect Milbank's focus on delivering reliable, utility-grade metering and service entrance equipment for electrical professionals.

Product Specs

Amperage Rating:
200 Continuous Ampere
Application:
Meter Socket With Main And Load Center
Brand Name:
Milbank
Bypass Provision:
Horn Bypass
Cable Entry:
Overhead or Underground
Equipment Ground:
Ground Bar
Frequency Rating:
60 Hertz
Hub Closing Plate:
Twin Small Closing Plates
Insulation:
Glass Polyester
Line Side Wire Range:
6 AWG - 350 kcmil
Load Side Wire Range:
6 AWG - 350 kcmil
Main Breaker Size:
One 200 Ampere Main Breaker
Number Branch Circuits:
8
Number Of Jaws:
4 Terminal
Number Of Main Breakers:
1
Number Of Meter Positions:
1 Position
Number Of Receptacles:
0
Phase:
1 Phase
Product Family Code:
MTMN
Product Height:
30 IN
Product Length:
4.5 IN
Product Size:
4.5L x 14.125W x30H
Product Type:
Ringless Meter Socket
Standards:
UL Listed;Type 3R
Terminal:
Lay in
Unspsc Number:
39121102
Voltage Rating:
Up to 240 Volts Alternating Current
Product Material:
G90 Galvanized Steel with Powder Coat Finish
Product Mounting:
Surface Mount
Amps:
200
Product Width:
14.125 IN
Department:
Electrical
Product Subgroup:
Metering & Meter Sockets
Insulation Type:
Glass Polyester
Hub Style:
Twin Small Closing Plates
Installation Category:
Surface Mount
Terminal Type:
Lay In
Number of Phases:
1
Product Details:
Ringless Meter Socket
Frequency:
60 hertz
Number of Terminations:
4
Product Group:
Power Distribution

Milbank U5168-XTL-200-KK-PL – Frequently Asked Questions

1) Will the Milbank U5168-XTL-200-KK meter main work for a 200A single-phase 240V residential service?
That is exactly the service it is built for: 200 continuous amps, 1-phase, up to 240 volts AC at 60 Hz, with one 200A main breaker feeding an 8-circuit load center in the same enclosure. One meter position, 4-terminal (4-jaw) socket, which is the standard single-phase residential socket. It will not serve a 3-phase or network service, and it will not serve two tenants, there is only the one meter position.
2) My utility requires a horn bypass on new meter sockets. Does this Milbank 200A meter main have one?
Horn bypass is the bypass provision on the U5168-XTL-200-KK. That lets the utility jumper around the meter and keep service up while the meter is pulled, so the customer's power does not drop during a meter change. It is a ringless socket, so there is no meter ring to remove for the pull either. If your utility spec calls for a lever bypass or no bypass at all, this is not the socket to order.
3) What size service conductors will land in this Milbank meter main combo?
Lay-in terminals take 6 AWG through 350 kcmil on both the line and the load side. That covers the usual 200A residential runs (4/0 aluminum SER or 2/0 copper) with room up to 350 kcmil if the run is long enough that the conductors were upsized for voltage drop. Lay-in means you set the conductor in and torque it down rather than threading it through a closed barrel, which matters when you are working a stiff 350 in a 14-1/8 inch wide can.
4) How much wall space do I need for the Milbank U5168-XTL-200-KK, and can it go on an outside wall?
Plan for a footprint of 4.5 x 14.125 x 30 inches. It surface mounts, so it sits proud of the wall rather than recessing into the stud bay, and the enclosure is Type 3R for outdoor use, rain, sleet and windblown debris. Body is G90 galvanized steel with a powder coat finish for exposed locations. Type 3R is not a washdown or submersion rating, so keep it off grade level in a flood-prone spot.
5) Is 8 circuits enough, or do I still need a separate panel downstream of this meter main?
The load center section carries 8 branch circuit spaces behind the single 200A main. For a small dwelling, a shop, a well house, or a mobile home service where you only need a handful of circuits, that finishes the job in one can and one rough-in. For a full house, treat the 8 spaces as the service disconnect plus a few outdoor or well circuits, and run a feeder from a load-side breaker to an interior panel for the rest. A ground bar is built in for equipment grounding terminations.
6) Which version of the U5168-XTL-200-KK do I order if the utility wants a barrel lock or a specific approval?
Six versions ship under this model. Standard is U5168-XTL-200-KK. For utility lock provisions, order -BL for a 9/16 inch barrel lock, -BLG for a 7/8 inch barrel lock, or -PL for 7/8 inch knockouts lock provision. For utility approvals, -ALT is the Alliant Energy approved build and -CECHA is the CECHA approved build. Ask the serving utility which one is on their approved list before you order, because the lock provision is punched at the factory and cannot be added in the field.
7) Can I use this Milbank meter main on an overhead drop, or is it underground only?
Either one. Cable entry is rated for overhead or underground service, and twin small hub closing plates come with it, so you close off the top opening you are not using. On an overhead drop you open the top for the weatherhead hub; on an underground lateral you leave the top plated and bring the lateral in the bottom. The hub itself is sized to the service raceway and is a separate item from the socket.
8) Do I need a meter ring for a ringless socket like the Milbank U5168-XTL-200-KK?
No ring is needed. A ringless socket holds the meter with the cover itself, so the utility pulls the cover to reach the meter instead of cutting a sealing ring. If your utility standardizes on ring-type sockets, this one will not satisfy that spec, and their meter tech may refuse to set it. Ringless versus ring-type is a utility decision, not an installer preference, so confirm it against their service standard.
9) Is the Milbank U5168-XTL-200-KK UL Listed for a service entrance?
It is UL Listed and rated Type 3R. Internal insulation is glass polyester, which is what holds the jaw assembly and carries the dielectric duty at 240 volts. Those are the ratings carried on the U5168-XTL-200-KK.
10) Is a meter main combo cheaper on labor than a separate meter socket and panel?
The tradeoff is one can instead of two. A combination unit puts the meter socket, the 200A main disconnect and 8 branch circuit spaces in one 4.5 x 14.125 x 30 inch enclosure, so you mount once, land the service conductors once, and skip the nipple and feeder between a standalone socket and an outdoor panel. Where a separate socket and panel still win is circuit count and future expansion, since 8 spaces is the ceiling here and the main breaker is fixed at 200A. On a new house where the panel goes indoors anyway, a plain socket plus an interior panel is often the better layout.
11) Does this Milbank meter main include a receptacle for a generator or maintenance outlet?
There is no receptacle in the U5168-XTL-200-KK, the receptacle count is zero. If you need a GFCI convenience outlet at the service, run it as one of the 8 branch circuits or specify a socket built with a factory receptacle instead. What does come built in is the ground bar for equipment grounding terminations.
How fast can I get the Milbank U5168-XTL-200-KK-PL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milbank U5168-XTL-200-KK-PL come with a warranty?
Absolutely. The Milbank U5168-XTL-200-KK-PL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milbank U5168-XTL-200-KK-PL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milbank U5168-XTL-200-KK-PL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!