Milwaukee 1675-6 Hole Hawg 1/2 in. Right Angle Drill, Dual Speed 300/1200 RPM

Milwaukee 1675-6 Hole Hawg 1/2 in. Right Angle Drill, Dual Speed 300/1200 RPM

The Milwaukee 1675-6 Hole Hawg is a 1/2 in. right angle drill engineered for professionals who need to bore large holes quickly and reliably during electrical, plumbing, and general construction rough-in work. This Hole Hawg model runs on a dual speed setting of 300/1200 RPM, giving electricians and other trade professionals the flexibility to match drill speed to bit diameter and the material being drilled, whether that is dimensional lumber, engineered joists, or other structural framing. The low-profile right angle housing that defines every Hole Hawg allows the 1675-6 to fit into tight stud bays and joist spaces where a standard in-line drill simply cannot reach, making it a staple tool for running conduit, cable, and pipe through framed structures on the jobsite. Whether boring pilot holes for rough-in wiring or opening larger passages for pipe, the 1675-6 is built to handle repeated, high-torque drilling day after day.

Key Features

• 1/2 in. Chuck Capacity: The 1675-6 accepts large-diameter bits, making it well suited to boring the oversized holes required for conduit, cable, and pipe runs through studs and joists.
• Dual Speed Range, 300/1200 RPM: Two selectable speed settings let the operator dial in the right balance of speed and torque for the bit size and material in use, from slow, high-torque boring to faster general-purpose drilling.
• Hole Hawg Right Angle Design: The compact right angle body characteristic of the Hole Hawg line lets the 1675-6 maneuver into tight joist bays and stud cavities where a standard in-line drill cannot fit.
• Model 1675-6: Part of Milwaukee's Hole Hawg family of right angle drills, a longstanding choice among electricians and other trade professionals for high-volume hole drilling.
• Professional-Grade Build: Designed for daily use on demanding jobsites where dependable, repeated drilling performance is required from one job to the next.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Electrical Rough-In and Conduit Routing
• Cable and Wire Pass-Through Drilling
• Plumbing Pipe Installation
• Stud and Joist Drilling in Framed Construction
• Commercial and Residential Construction Projects

Why Milwaukee?

Milwaukee built the Hole Hawg line to give electricians, plumbers, and other trade professionals a dependable right angle drill that keeps working through the toughest boring tasks on the jobsite. The 1675-6's 1/2 in. chuck capacity and 300/1200 RPM dual speed range give crews the versatility to handle a wide range of bit sizes and materials without swapping tools, while the compact right angle housing keeps the drill working in tight framing spaces that other drills simply cannot reach. For professionals who need a hole-drilling tool they can count on job after job, the Milwaukee 1675-6 Hole Hawg delivers dependable, professional-grade performance.