Milwaukee 48-32-4310 SHOCKWAVE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.47
Milwaukee 48-32-4310 SHOCKWAVE Double-Ended PH2/SL #10 Impact Duty Screwdriver Bit

Milwaukee 48-32-4310 SHOCKWAVE Double-Ended PH2/SL #10 Impact Duty Screwdriver Bit

(No reviews yet) Write a Review

Model: 48-32-4310

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Milwaukee 48-32-4310 SHOCKWAVE Double-Ended PH2/SL #10 Impact Duty Screwdriver Bit

The Milwaukee 48-32-4310 SHOCKWAVE Double-Ended PH2/SL #10 Impact Duty Screwdriver Bit combines two of the most frequently used screwdriving tips into a single accessory, pairing a PH2 (Phillips #2) tip on one end with an SL #10 (slotted #10) tip on the other end. Built to Milwaukee's Impact Duty specification, this bit is engineered to hold up to the repeated torque spikes and rotational stress generated by impact drivers, helping reduce the stripping, cam-out, and bit breakage that standard driver bits can experience under sustained impact use. As part of the SHOCKWAVE line of impact-rated accessories, the double-ended format lets electricians, contractors, and maintenance technicians switch between Phillips and slotted fasteners simply by flipping the bit end-to-end, cutting down on the number of loose bits that need to be carried in a pouch, pocket, or bit case on the job site.

Key Features

  • Dual Tip Configuration: PH2 (Phillips #2) tip on one end and SL #10 (slotted #10) tip on the other, covering two of the most common fastener drive types in a single accessory.
  • Impact Duty Rated: Engineered for use in impact drivers, built to withstand the higher torque output and repeated impact forces of powered driving rather than standard drill use.
  • Double-Ended Design: Flip the bit end-to-end to access the second tip instead of swapping between two separate bits, saving time mid-task.
  • SHOCKWAVE Series: Part of Milwaukee's SHOCKWAVE line of impact-rated driving accessories designed for demanding professional trade use.
  • Fewer Bits to Manage: Combining two drive types on one bit helps keep bit sets organized and reduces the chance of misplacing individual bits on the job.

Typical Applications

  • Driving Phillips #2 fasteners with an impact driver
  • Driving slotted #10 fasteners with an impact driver
  • Professional electrical, construction, and trade job site fastening tasks
  • Maintenance, repair, and general assembly work requiring frequent tip changes
  • Reducing bit-swapping and pouch clutter by carrying one double-ended bit instead of two separate bits

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Why Milwaukee?

Milwaukee's SHOCKWAVE line is built around the demands of impact driving, and the 48-32-4310 double-ended bit extends that Impact Duty engineering to two of the most frequently used tip types on a single accessory. For professionals who rely on impact drivers throughout the workday, that combination of PH2 and SL #10 tips in one bit means fewer accessories to dig through in a pouch or case, without sacrificing the durability Milwaukee builds into its Impact Duty and SHOCKWAVE driving accessories.

Manufacturer Resources

Product Specs

list_batch:
MWK-20260922
Product Type:
Driver Bit
Series:
SHOCKWAVE
Configuration:
Double-Ended
Department:
Electrical
Product Subgroup:
Drill & Driver Bits
Product Group:
Power Tools & Accessories
Product Length:
2 in
Product Material:
Proprietary Steel

Milwaukee 48-32-4310 – Frequently Asked Questions

1) What tips are on the Milwaukee 48-32-4310 SHOCKWAVE double-ended bit?
One end is a PH2 (Phillips #2), the other is an SL #10 slotted tip. You flip the bit end for end rather than swapping bits, which covers the two fastener heads most commonly found in panel work and device terminations.
2) Can I use this Milwaukee bit in an impact driver, or is it drill-only?
It's built to Milwaukee's Impact Duty specification, so an impact driver is exactly what it's made for. The SHOCKWAVE line is engineered for the repeated torque spikes and rotational stress of powered impact driving, which is where standard driver bits tend to cam out or snap. It works in a standard drill/driver too.
3) What is the difference between the Milwaukee 48-32-4310 SHOCKWAVE bit and the Rack-A-Tiers 70241BL Phillips bit?
The Milwaukee 48-32-4310 is a double-ended bit with a PH2 (Phillips #2) tip on one end and an SL #10 (slotted) tip on the other, so one accessory covers both drive types by flipping it end to end, and it is built to Milwaukee's Impact Duty specification for use in impact drivers. The Rack-A-Tiers 70241BL is a single-ended #2 Phillips bit in a 4-inch length from the 702 Series, blue in color. If the fasteners on the job are all Phillips #2, the 70241BL covers that one drive type in a longer 4-inch bit; if the work mixes Phillips and slotted screws, the 48-32-4310 handles both without a second bit in the pouch.
4) Will a double-ended bit hold in my impact driver's quick-change chuck?
Double-ended bits use a plain hex shank with a tip on each end, not a ball-detent groove, so they seat in a standard 1/4 inch hex holder but are not retained by the detent ring the way an insert bit with a groove is. In a quick-change chuck you'll normally run it in a magnetic bit holder. If you want a bit that locks straight into the chuck, use a single-ended insert or power bit instead.
5) Is one double-ended bit a good idea for an electrician's pouch, or should I carry separate Phillips and slotted bits?
For service and MRO work where you're alternating between Phillips #2 device screws and slotted #10 terminal screws, the 48-32-4310 cuts you down to one bit instead of two and there's nothing loose to lose in the pouch. The trade-off is that when either tip wears or chips, you replace the whole bit. Crews doing repetitive production driving on one head type usually keep dedicated single-tip bits on hand as well.
6) What else does ZenSupply carry if I just need a #2 Phillips driver bit?
For a single-tip Phillips #2, there's the Rack-A-Tiers 70241BL from the 702 Series, a 4-inch blue #2 Phillips bit. The extra length reaches into recessed boxes and enclosures that a short double-ended bit cannot. The Milwaukee 48-32-4310 is the pick when you also need a slotted #10 tip on the same accessory.
7) Will the SL #10 end fit the slotted terminal screws on receptacles and breakers?
The slotted end is sized #10, which is the common slotted screw size on wiring devices and breaker lugs. Tip width has to match the screw slot to avoid burring the head, so for noticeably smaller slotted machine screws or finish hardware you'd want a narrower slotted bit than the #10.
8) Can I use a standard Phillips driver bit in an impact driver instead of the SHOCKWAVE bit?
A standard driver bit and an impact-rated bit are not the same accessory. The Milwaukee 48-32-4310 SHOCKWAVE bit is built to Milwaukee's Impact Duty specification, engineered for the repeated torque spikes and rotational stress an impact driver produces, which is what guards against cam-out and bit breakage under sustained impact use. The Rack-A-Tiers 70241BL is a #2 Phillips bit from the 702 Series in a 4-inch length - a good match for standard Phillips driving, but it is the Impact Duty engineering that distinguishes the SHOCKWAVE bit for impact driver service. If the tool in hand is an impact driver, specify the impact-rated bit.
How fast can I get the Milwaukee 48-32-4310 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 48-32-4310 come with a warranty?
Absolutely. The Milwaukee 48-32-4310 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 48-32-4310?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 48-32-4310 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!