Milwaukee 48-32-4311 SHOCKWAVE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.47
Milwaukee 48-32-4311 SHOCKWAVE PH2/SQ2 Impact-Duty Double-Ended Driver Bit

Milwaukee 48-32-4311 SHOCKWAVE PH2/SQ2 Impact-Duty Double-Ended Driver Bit

(No reviews yet) Write a Review

Model: 48-32-4311

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Milwaukee 48-32-4311 SHOCKWAVE PH2/SQ2 Impact-Duty Double-Ended Bit

The Milwaukee 48-32-4311 SHOCKWAVE PH2/SQ2 Impact-Duty Double-Ended Bit gives electrical and construction professionals a fast way to switch between two of the most commonly used fastener drives on the jobsite. Built as part of Milwaukee's SHOCKWAVE line of impact-rated accessories, this double-ended bit combines a Phillips #2 (PH2) tip on one end with a Square #2 (SQ2) tip on the other, letting installers flip the bit instead of digging for a second bit when moving between fastener types. Rated for impact duty, it is engineered to hold up to the repeated torque spikes and high vibration that impact drivers generate during panel, enclosure, and general electrical assembly work, helping reduce bit failure and downtime compared to standard, non-impact-rated bits.

Key Features

  • Dual-Tip Design: One PH2 (Phillips #2) tip and one SQ2 (Square #2) tip on a single double-ended bit, cutting down on bit-swapping and lost time between fastener changes.
  • Impact Duty Rated: Engineered as part of the SHOCKWAVE impact-duty accessory line to withstand the high-torque, high-vibration output of impact drivers over repeated use.
  • SHOCKWAVE Series: Backed by Milwaukee's SHOCKWAVE line of impact-rated driving accessories built for demanding, day-to-day trade use.
  • Versatile Fastener Compatibility: Covers both Phillips #2 and Square #2 fastener drives, two of the most common drive types found on electrical panels, boxes, and enclosures.
  • Space-Saving Bit Kit Solution: The double-ended format effectively puts two driving tips into one bit, reducing the number of individual bits an electrician or contractor needs to carry.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Electrical Panel and Enclosure Assembly
  • Conduit, Box, and Bracket Hardware Installation
  • Commercial and Residential Electrical Contracting
  • General Construction Fastening Tasks
  • Jobsite Use with Impact Drivers

Why Milwaukee?

Milwaukee's SHOCKWAVE accessory line is engineered for professionals who rely on impact drivers every day, and the 48-32-4311 double-ended bit continues that focus by pairing two of the most-used drive types, Phillips #2 and Square #2, into a single impact-duty accessory. For electricians and contractors who need dependable driving performance without carrying extra bits, this SHOCKWAVE double-ended bit is built to keep pace with the demands of impact-rated jobsite work.

Manufacturer Resources

Product Specs

list_batch:
MWK-20260922
Product Type:
Driver Bit
Series:
SHOCKWAVE
Configuration:
Double Ended
Department:
Electrical
Product Subgroup:
Drill & Driver Bits
Product Group:
Power Tools & Accessories
Product Length:
2 in
Product Material:
Proprietary Steel

Milwaukee 48-32-4311 – Frequently Asked Questions

1) What tips are on the Milwaukee 48-32-4311 SHOCKWAVE double-ended bit?
One end is a Phillips #2 (PH2), the other is a Square #2 (SQ2), also called Robertson #2. You flip the bit instead of swapping bits when you move between the two drive types, which is why it suits panel and enclosure work where both show up on the same job.
2) Can I run the 48-32-4311 bit in an impact driver, or is it drill-only?
It's built for an impact driver. The 48-32-4311 is part of Milwaukee's SHOCKWAVE impact-duty accessory line, made to take the repeated torque spikes and vibration an impact driver puts out. It will run in a standard drill/driver too, but a non-impact-rated bit in an impact driver is where snapped tips come from.
3) What is the difference between the Milwaukee 48-32-4311 SHOCKWAVE bit and the Rack-A-Tiers 70462RY magnetic driver bit?
They drive different fasteners. The Milwaukee 48-32-4311 is a double-ended impact-duty bit with a Phillips #2 tip on one end and a Square #2 tip on the other, aimed at panel, enclosure, and general electrical fastening with an impact driver. The Rack-A-Tiers 70462RY is a 2-inch hexagonal magnetic driver bit of the C-Rhex type, used for driving hex-head sheet metal and self-drilling screws. If the screws on the job are Phillips or square drive, the 48-32-4311 is the bit; if they are hex head, the 70462RY is.
4) Does a double-ended bit fit a standard 1/4 inch hex bit holder or magnetic sleeve?
Double-ended driver bits use the standard 1/4 inch hex shank, so the 48-32-4311 seats in a 1/4 inch quick-change chuck, bit holder, or magnetic sleeve. Note that a double-ended bit has a tip on both ends rather than a hex drive end, so it is meant to be held in a holder or sleeve, not gripped directly by a chuck detent on a tip.
5) Should I buy a double-ended PH2/SQ2 bit or separate single bits?
Go double-ended if you're switching drive types constantly, as electricians do between panel screws, box screws, and bracket hardware. The 48-32-4311 puts both tips in one bit so you carry less. Pick single-ended insert or power bits instead when you need length reach into a deep enclosure or a magnetic tip to hold the fastener, since the double-ended format trades those off for the second tip.
6) Will a PH2/SQ2 bit drive the screws in electrical panels and enclosures?
Yes for the common ones. Phillips #2 and Square #2 are the two drive types found on most panel covers, device screws, boxes, and enclosure hardware, which is why Milwaukee pairs them on one bit. Combination (combo) heads that accept either drive are covered as well. Hex-head self-drillers and Torx fasteners are not, so keep those drivers separate.
7) Can I use the Rack-A-Tiers 70462RY instead of the Milwaukee SHOCKWAVE 48-32-4311 for driving panel screws?
Only if those screws are hex head. The Rack-A-Tiers 70462RY is a hexagonal magnetic driver bit in the C-Rhex line, so it seats on hex-head fasteners and its magnet holds the screw on the bit. The Milwaukee 48-32-4311 carries a Phillips #2 tip and a Square #2 tip, which are the drives commonly found on electrical panels, boxes, and enclosures. The two are not interchangeable on the same fastener; electricians who see both drive types often carry one of each.
8) Which driver bit holds the screw on the tip by itself?
The Rack-A-Tiers 70462RY is a magnetic hexagonal driver bit, so it retains a hex-head screw on the bit for one-handed starts overhead or in a tight enclosure. The Milwaukee 48-32-4311 is a double-ended bit with a Phillips #2 tip on one end and a Square #2 tip on the other; because both ends carry a driving tip, it is flipped in the holder to change drive types rather than relying on tip retention of the fastener.
How fast can I get the Milwaukee 48-32-4311 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 48-32-4311 come with a warranty?
Absolutely. The Milwaukee 48-32-4311 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 48-32-4311?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 48-32-4311 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!