Minerallac 10707-6 7 x 7/16" Pan Head Metal Piercing Framing Screws
The Minerallac 10707-6 is a 7 x 7/16" pan head framing screw engineered with a sharp point for metal-piercing applications. Featuring a Phillips drive and a black finish, this screw is designed for fast, secure fastening into metal framing components without the need for pre-drilling. Sold in a convenient jar package, the 10707-6 gives electrical and construction professionals a ready supply of small-diameter fasteners for everyday framing and mounting tasks.
Key Features
- Screw Size: 7 x 7/16" provides a compact fastener sized for light-gauge metal framing and mounting hardware.
- Sharp Point: A metal-piercing sharp point allows the screw to self-start and drive directly into thin metal without a pilot hole, speeding up installation.
- Pan Head Design: The pan head profile offers a broad bearing surface for a secure, low-profile hold once seated.
- Phillips Drive: A Phillips recess allows for quick, consistent driving with standard Phillips bits and drivers.
- Black Finish: The black finish provides a clean, uniform appearance suited to a range of framing and mounting applications.
- Jar Packaging: Packaged in a jar for organized storage and easy access to individual screws on the job or in the shop.
Technical Specifications
- Screw Size: 7 x 7/16"
- Head Type: Pan Head
- Point Type: Sharp, Metal Piercing
- Drive Type: Phillips
- Finish/Color: Black
- Packaging: Jar
Typical Applications
- Metal Stud and Light-Gauge Framing Assembly
- Electrical Box and Bracket Mounting to Metal Surfaces
- General Commercial and Industrial Metal Fastening
- Renovation and New Construction Framing Work
Why Minerallac?
Minerallac's 10707-6 pan head framing screws are built with a sharp, metal-piercing point and durable black finish to deliver dependable, self-starting performance in metal framing applications. The Phillips drive and jar packaging make these screws easy to handle and quick to install for electrical and construction professionals who need reliable small fasteners on hand.
Manufacturer Resources
Product Specs
- list_batch:
- MIN-20260924
- Product Type:
- Sheet Metal Screw
- Configuration:
- Pan Head, Phillips Drive
- Department:
- Electrical
- Product Subgroup:
- Self-Tapping Screws
- Product Material:
- Steel
- Product Color:
- Black
- Product Size:
- 7/16"
- Product Group:
- Hangers, Supports & Fasteners
- Country of Origin:
- Taiwan
- Product Finish:
- Black Phosphate
- Product Length:
- 0.438 in
Minerallac 10707-6 – Frequently Asked Questions
1) Will the Minerallac 10707-6 framing screw drive into metal studs without pre-drilling?
Yes. The 10707-6 has a sharp, metal-piercing point that self-starts in light-gauge metal, so no pilot hole is needed. That is what makes it quick for running brackets and boxes onto metal stud framing. For heavier structural steel you would want a self-drilling point instead, since a sharp point relies on thin material to bite.
2) What does the black finish on the Minerallac 10707-6 screw actually mean for corrosion?
The finish is black phosphate over steel. Phosphate gives a dark, uniform look and mild corrosion resistance in dry interior work, which is where these framing screws belong. For damp, exterior, or wash-down locations, specify a zinc-plated or coated fastener instead.
3) Is a pan head the right choice for mounting electrical boxes and brackets?
Yes, for that work a pan head is what you want. The flat underside of the pan head bears broadly on the bracket or box flange and seats low without needing a countersunk hole, which is why the 10707-6 is used for mounting boxes and straps to metal surfaces. Where the screw has to sit flush in a countersink, use a flat or wafer head instead.
4) Are these the same as drywall screws for metal studs?
No. Drywall screws use a bugle head that pulls into the board face; the 10707-6 is a 7/16 inch pan head framing screw for fastening metal to metal, such as hardware and brackets onto light-gauge framing. Use it for the hardware, not for hanging board.
5) What driver bit do I need for these Minerallac framing screws?
A standard Phillips bit. The 10707-6 is a pan head with a Phillips recess, so any ordinary Phillips driver or screwgun bit runs them. No square drive or Torx bit required.
6) How are the Minerallac 10707-6 screws packaged for a shop or van stock?
They come in a jar, which keeps a small fastener like this contained on a truck or at a bench rather than loose in a bag. One MPN covers it: 10707-6, in the single 7/16 inch size.
7) Where are Minerallac 10707-6 screws made?
Country of origin is Taiwan. That matters on jobs with domestic-sourcing requirements, so check your spec if the project carries a Buy American or similar clause.
How fast can I get the Minerallac 10707-6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac 10707-6 come with a warranty?
Absolutely. The Minerallac 10707-6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac 10707-6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Minerallac 10707-6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.