Minerallac 602BSS Set Screw Be...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$25.04
Minerallac 602BSS Set Screw Beam Clamp, Type 304 Stainless Steel, Fits Up to 3/4" Flange

Minerallac 602BSS Set Screw Beam Clamp, Type 304 Stainless Steel, Fits Up to 3/4" Flange

(No reviews yet) Write a Review

Model: 602BSS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$25.04
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Minerallac 602BSS Set Screw Beam Clamp, Type 304 Stainless Steel, Fits Up to 3/4" Flange

The Minerallac 602BSS Set Screw Beam Clamp, Type 304 Stainless Steel, Fits Up to 3/4" Flange provides a secure, corrosion-resistant method for attaching conduit, cable tray, and support systems directly to structural steel beams. Engineered to fit beam flanges up to 3/4" thick, this beam clamp features 3/8"-16 tapped holes on both the bottom and back of the clamp body, allowing installers to mount threaded rod or hardware in whichever orientation best suits the job. Constructed from Type 304 stainless steel, the 602BSS resists corrosion in demanding indoor and outdoor environments where standard plated steel hardware would otherwise degrade over time, making it a long-lasting choice for structural support work.

Key Features

  • Flange Fit: Designed to fit beam flanges up to 3/4" thick, suiting a wide range of structural steel beam sizes.
  • Durable Construction: Type 304 stainless steel body resists corrosion, moisture, and humidity better than standard plated steel hardware.
  • Dual Tapped Mounting Holes: 3/8"-16 tapped holes are located on both the bottom and back of the clamp, allowing threaded rod or hardware to be installed in the orientation that best fits the installation.
  • Set Screw Attachment: A set screw secures the clamp firmly to the beam flange without drilling or welding, speeding up installation time.
  • Versatile Beam Mounting: Provides a reliable structural attachment point for conduit runs, cable tray, and support rod in commercial and industrial facilities.
  • Corrosion-Resistant Hardware: Type 304 stainless steel construction makes the 602BSS well suited to washdown areas, coastal environments, and other corrosive installation conditions.
  • Indoor and Outdoor Use: Stainless steel construction makes the 602BSS suitable for both indoor and outdoor beam mounting applications.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Structural Steel Beam Mounting
  • Conduit and Cable Tray Support Systems
  • Threaded Rod Attachment for Hangers
  • Support Rod and Hanger Systems
  • Commercial and Industrial Electrical Installations
  • Indoor and Outdoor Support Applications

Why Minerallac?

Minerallac builds the 602BSS from Type 304 stainless steel with precision 3/8"-16 tapped mounting holes on both the bottom and back of the clamp, giving contractors a durable, corrosion-resistant beam clamp that installs quickly with a single set screw. This combination of rugged stainless steel material and flexible dual-hole mounting makes the 602BSS a dependable choice for professional electrical and mechanical support work on structural steel beams in both indoor and outdoor settings.

Manufacturer Resources

Product Specs

list_batch:
MIN-20260918
Product Type:
Beam Clamp
Connection Type:
Set Screw
Department:
Electrical
Product Subgroup:
Clamps
Product Material:
Type 304 Stainless Steel
Product Size:
3/4"
Product Group:
Hangers, Supports & Fasteners
Country Of Origin:
United States
Product Finish:
Stainless
Product Color:
Silver
Product Width:
2.2 in
Product Length:
1.2 in

Minerallac 602BSS – Frequently Asked Questions

1) What beam flange thickness does the Minerallac 602BSS beam clamp fit?
The 602BSS fits beam flanges up to 3/4 inch thick, which covers most structural steel wide-flange and I-beam sizes you'll find in commercial and industrial buildings. The set screw clamps onto the flange edge, so no drilling or welding on the structure is needed. If your flange measures thicker than 3/4 inch, this clamp will not seat.
2) Can I hang conduit off a steel beam with a stainless beam clamp in a washdown or coastal area?
That is what the Minerallac 602BSS is built for. The body is Type 304 stainless steel, so it holds up in washdown bays, coastal salt air, and humid outdoor locations where plated or galvanized steel clamps corrode. It gives a structural attachment point for conduit runs, cable tray, and support rod.
3) How is the Minerallac 602BSS different from a malleable iron beam clamp like the Appleton IS-500 or Steel City RC-2SC?
Two differences decide it: material and rod size. The 602BSS is Type 304 stainless steel with 3/8-16 tapped holes. The Appleton IS-500 is malleable iron, screw-type with a hexagonal head and a 1/4-20 tap, and the Thomas & Betts RC-2SC Steel City clamp is galvanized malleable iron in a 2-inch size. For dry interior work with 1/4-20 rod, the malleable iron clamps are the conventional pick. For corrosive or exterior exposure, or where the hanger uses 3/8 inch rod, go stainless with the 602BSS.
4) I need beam clamps for 1/4 inch-20 threaded rod in bulk. Is the Minerallac 602BSS the right one?
No. The 602BSS is tapped 3/8-16 and will not take 1/4-20 rod. For 1/4-20 work the Kindorf FBC1 structural beam clamp is sized for that rod and comes in packs of 100, which suits repetitive hanger layouts. The Appleton IS-500 is also 1/4-20.
5) I need a beam clamp for 1/4"-20 threaded rod, not 3/8" rod. What should I use instead of the Minerallac 602BSS?
The 602BSS is tapped 3/8"-16 on both the bottom and the back of the clamp body, so it will not take 1/4"-20 rod. For 1/4"-20 hanger rod, the Kindorf FBC1 structural beam clamp is built for that thread and is supplied in packs of 100, and the Appleton IS-500 malleable iron beam clamp is a screw-type clamp with a hexagonal head and a 1/4-20 tapped hole. Match the clamp tap to the rod diameter you are already running rather than adapting at the clamp.
6) What is the difference between the Minerallac 602BSS beam clamp and the Thomas & Betts RC-2SC Steel City beam clamp?
The Minerallac 602BSS is a set screw beam clamp made from Type 304 stainless steel, sized for beam flanges up to 3/4 inch thick, with 3/8"-16 tapped holes on both the bottom and back of the body. The Thomas & Betts RC-2SC is a 2-inch galvanized malleable iron beam clamp. If the attachment point sits in a washdown bay, a coastal exterior, or anywhere plated steel corrodes, the stainless 602BSS is the material match; for dry interior steel the galvanized malleable iron RC-2SC is the heavier-casting alternative.
7) Can the Minerallac 602BSS support rod running horizontally instead of straight down?
Yes. Tapped 3/8-16 holes sit on both the bottom and the back of the clamp body, so you can take the rod or hardware off the underside for a vertical drop or off the back face for a side-mounted attachment. One part covers both orientations, which cuts what you have to stage on the job.
8) Is the Appleton IS-500 a direct replacement for a Minerallac 602BSS?
No. Both are screw-type beam clamps, but they differ in two ways that matter at the beam. The Appleton IS-500 is malleable iron with a hexagonal head and a 1/4-20 tapped hole, while the Minerallac 602BSS is Type 304 stainless steel with 3/8"-16 taps on the bottom and back. Swapping one for the other changes both the rod thread you can hang and the corrosion behavior of the attachment.
9) For a large conduit support job where I need a hundred beam clamps at once, how does the Kindorf FBC1 compare to the Minerallac 602BSS?
The Kindorf FBC1 structural beam clamp is sold as a pack of 100 and is tapped for 1/4"-20 threaded rod, which suits repetitive hanger runs on one rod size. The Minerallac 602BSS is a 3/4 inch flange clamp in Type 304 stainless steel with 3/8"-16 taps, and its stainless body is the one to specify where the run passes through corrosive or outdoor areas. Many jobs use the bulk 1/4"-20 clamp through dry interior space and the stainless 602BSS only where the environment demands it.
10) Will the stainless beam clamp match the rest of my stainless hanger hardware visually?
It will. The 602BSS carries a bare stainless finish in a silver appearance, no paint or plating to chip, so it reads the same as stainless rod, strut, and channel nuts on exposed runs.
How fast can I get the Minerallac 602BSS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Minerallac 602BSS come with a warranty?
Absolutely. The Minerallac 602BSS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Minerallac 602BSS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Minerallac 602BSS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!