Kraloy 078351 1-1/4-Inch PVC Meter Offset Fitting

Yes. The socket end on the MO12 is a 1-1/4 inch solvent weld female, so it bonds directly to 1-1/4 inch rigid PVC conduit with standard PVC cement. The opposite end is threaded male, so it lands in a 1-1/4 inch threaded hub on the meter can. It is a single-size fitting, so a different conduit size needs a different offset or a reducing bushing on the run.

It carries UL 651, the standard for rigid PVC conduit and fittings, plus CSA C22.2 No. 85 for Canadian work, and it is NAFTA compliant. Those two listings are what an inspector looks for on a PVC service riser fitting.

The MO12 is rigid PVC with watertight threaded and solvent weld connections, and Kraloy lists it for marinas, water and sewage treatment plants, fish plants, car washes, steel mills, mines and street and highway lighting. Those are wet and chemically aggressive environments where PVC is chosen over steel conduit specifically because it does not corrode.

Order Kraloy MO12, catalog number 078351, manufacturer part 78351. It ships as one configuration, so there is no finish or size option to specify.

No. Residential is one of the listed applications, but Kraloy also calls it out for utilities, parking garages, airports, bridges and tunnels, subways, communications and cable, pulp and paper, food processing and agricultural work. It is the same fitting whether the run terminates at a house meter or an industrial enclosure.

The threaded end on the MO12 is male, so it threads into a hub or takes a locknut on a knockout, depending on how your meter can is prepped. Kraloy supplies the offset itself; sealing washers, locknuts, conduit, and PVC solvent cement for the socket end are separate items on the order.