Klein Tools 70035 Multi-Bit Ma...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$80.86
$30.86
Klein Tools 70035 Multi-Bit Magnetic Screwdriver, Ph, Sl Bits, 5-Piece

Klein Tools 70035 Multi-Bit Magnetic Screwdriver, Ph, Sl Bits, 5-Piece

(No reviews yet) Write a Review

Model: 70035
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$80.86
$30.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Multi-Bit Magnetic Screwdriver, Ph, Sl Bits, 5-Piece

  • Warnings

    • Do NOT use to pry or chisel.
    • NOT insulated. Will NOT protect against electrical shock.
    • Always wear approved eye protection.

  • Features

    • Screwdriver has a powerful magnet built into its shank to hold interchangeable bits and also screws
    • Wide selection of bits for different screw types
    • Made in USA
    • Interchangeable bits store inside handle for quick access
    • Comfortable handle for easier driving


70035 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Accessories:
MAG2
Handle Color:
Black and Clear
Handle Material:
Plastic
Item Depth:
7.2500 in
Item Height:
1.2500 in
Item Weight:
0.2500 lbs
Item Width:
4.0000 in
Magnetic:
Yes
Overall Length:
3.438" (8.7 cm)
Phillips Bits:
#1, #2
Shank Length:
3.75" (9.5 cm)
Slotted Bits:
3/16" (4.8 mm), 9/32" (7.1 mm)
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Material:
Steel
Product Weight:
4 oz (113 g)
Product Type:
Hardware

Klein Tools 70035 – Frequently Asked Questions

1) What bits come with the Klein Tools 70035 multi-bit screwdriver?
The 70035 ships with four interchangeable bits: Phillips #1 and #2, and slotted 3/16 inch (4.8 mm) and 9/32 inch (7.1 mm). That covers the common device screws an electrician or maintenance tech hits on a panel cover, receptacle, or switch plate. The bits store inside the handle, so the four bits plus the driver make up the 5-piece count.
2) Is the Klein 70035 screwdriver insulated for live electrical work?
No. The 70035 is not insulated and will not protect against electrical shock, so it should not be used on energized conductors. If you need to work live, you need a driver rated and marked for insulated use. This one is a general-purpose driver for de-energized work.
3) How magnetic is the Klein 70035, and will it hold a screw on the bit?
There's a magnet built into the shank itself, which does two jobs: it retains the interchangeable bit so it doesn't drop out overhead, and it holds a steel screw on the tip while you start it. Useful one-handed on a ladder or reaching into a box. It will not hold stainless or brass screws, since those aren't magnetic.
4) How long is the shank on the Klein 70035 - will it reach into a deep box?
Shank length is 3.75 inches (9.5 cm). That is a mid-length driver, fine for device screws in a standard box and panel covers, but it will not reach down a deep recessed hole or a long counterbore. For those you want a longer-shank driver rather than this one.
5) Can I add more bit types to the Klein 70035 screwdriver?
The listed accessory for the 70035 is the Klein MAG2 magnetic tip. The driver itself ships with Phillips #1 and #2 plus 3/16 inch and 9/32 inch slotted bits stored in the handle. If you need square, Torx, or nut driver work, that's a different Klein multi-bit set rather than an add-on here.
6) Does the Klein 70035 fit in a tool pouch or shirt pocket?
It is compact for a multi-bit driver. Overall length is 3.438 inches (8.7 cm) and it weighs 4 oz (113 g), so it drops into a pouch pocket easily and won't weigh down a belt. The handle is plastic in black and clear, the clear section letting you see the stored bits without opening it up.
7) Can I use the Klein 70035 to pry open a panel cover or scrape paint?
No. Klein specifically warns against using this driver to pry or chisel. The shank and bits are steel and will bend or snap under side load, and a broken bit at eye level is why eye protection is called for. Use a proper pry bar or putty knife for that work.
8) Is the Klein Tools 70035 made in the USA?
Yes, the 70035 multi-bit magnetic screwdriver is made in the USA. That matters for MRO and institutional buyers working under domestic-sourcing purchasing rules, and it's stated by Klein for this model.
How fast can I get the Klein Tools 70035 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 70035 come with a warranty?
Absolutely. The Klein Tools 70035 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 70035?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 70035 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!