You may also like
Nail 1-1/2 Galv Roofing Box Nail St
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Nails
Metallics MN112HGJST – Frequently Asked Questions
1) What length are the Metallics MN112HGJST galvanized roofing nails?
The Metallics MN112HGJST is a 1-1/2 inch galvanized roofing nail. That length is the common pick for fastening through asphalt shingles plus underlayment into a nominal sheathing deck, where you want penetration into the deck without the point coming through thin plywood.
2) Are the MN112HGJST nails galvanized for outdoor use?
Yes, the MN112HGJST is a galvanized nail, which is why it is specified for roofing work where the fastener is exposed to weather and moisture. Bare steel nails rust and back out; the galvanized coating is what makes this one appropriate for exterior shingle and sheathing work.
3) Is the Metallics MN112HGJST a box nail or a common nail, and does that matter?
It is a box nail. A box nail uses a thinner shank than a common nail of the same length, so it is less likely to split thin or narrow stock, but it carries less load. For structural framing you want a common nail instead; for roofing and sheathing attachment the box nail profile is the right one.
4) Can I use 1-1/2 inch galvanized roofing nails for electrical work?
Metallics catalogues the MN112HGJST under its electrical fastener line, so it is stocked for electricians doing rough-in and exterior work alongside roofing trades. Mechanically it is a 1-1/2 inch galvanized box nail; use it where that length and a galvanized coating are what the job calls for, not as a substitute for a cable staple or a straps-and-clamp fastener.
How fast can I get the Metallics MN112HGJST delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MN112HGJST come with a warranty?
Absolutely. The Metallics MN112HGJST is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MN112HGJST?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MN112HGJST from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.