Metallics MN16C Nails 16D Bright Com Steel (Jar 115)

A 16d common nail is 3-1/2 inches long, which is the standard length for framing and rough-in wood work. The MN16C is a bright steel common nail with a flat head, and Metallics lists it for all types of rough-in wood construction, so it covers stud framing, blocking, backing for boxes and strapping, and nailing plates.

No. The MN16C has a bright finish, meaning bare uncoated steel with no galvanizing or other corrosion coating. Bright nails are for dry, interior rough-in only. For exterior framing, pressure-treated lumber, or anywhere damp, use a hot-dip galvanized or stainless nail instead, since treated lumber chemistry will corrode bare steel fast.

No. The MN16C is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, this nail will not satisfy it and you need a documented domestic-origin fastener.

Common nails like the MN16C are the framing choice. A common nail has a thicker shank and a broad flat head, giving more shear strength for structural connections, which is why codes and nailing schedules call out common sizes. Box nails use a thinner shank for less splitting and are meant for lighter, non-structural work like sheathing and fencing. For 2x stud-to-plate nailing, stay with 16d common.

These are loose bulk nails in a jar, not a collated strip or coil, so they are hand-driven with a hammer. A pneumatic or cordless framing nailer needs paper- or plastic-collated strips or wire coils matched to that tool, which this jar is not.

Yes. Metallics offers other sizes and quantities of bright common nails by request, so if you need an 8d or 10d for lighter rough-in, or bulk boxes instead of the 115-count jar, those can be sourced.