NGP 102VDKB Vinyl Door Sweep w...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$44.28
NGP 102VDKB Vinyl Door Sweep with Dark Bronze Finish - Commercial Grade Weatherstripping

NGP 102VDKB Vinyl Door Sweep with Dark Bronze Finish - Commercial Grade Weatherstripping

(No reviews yet) Write a Review

Model: 102VDKB-36

In Stock (leaves warehouse same day if ordered before 3pm ET)

$44.28
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

NGP Vinyl Door Sweep with Dark Bronze Finish - Commercial Grade Weatherstripping

Professional Door Bottom Sealing Solution

The NGP Vinyl Door Sweep delivers commercial-grade weatherstripping performance with aluminum alloy 6063 T5 temper construction and synthetic EPDM rubber in polypropylene thermoplastic matrix. This door bottom sweep features exceptional temperature resistance from -81 F to 275 F and BHMA certification to ANSI/BHMA A156.22 performance tests for heat and cold. The dark bronze finish provides professional appearance while the snap-on cover conceals screw heads for clean installation aesthetics.

Professional Features & Benefits

  • Temperature Resistance: Operates reliably from -81 F to 275 F for extreme climate applications and seasonal temperature variations.
  • Heavy-Duty Construction: Aluminum alloy 6063 T5 temper frame provides exceptional durability for high-traffic commercial applications.
  • Advanced Rubber Compound: Synthetic EPDM rubber in polypropylene thermoplastic matrix delivers superior abrasion resistance, tensile strength and memory retention.
  • Weather Protection: Flame-resistant and moisture-resistant design with excellent resistance to ozone, sunlight and aging for long-term performance.
  • BHMA Certification: Certified to ANSI/BHMA A156.22 performance tests for heat and cold ensuring compliance with commercial building standards.
  • Professional Installation: Snap-on cover conceals screw heads for clean appearance with slotted screw holes for easy adjustment during installation.
  • Complete Hardware: Includes #6 X 3/4" stainless steel sheet metal screws for secure mounting and corrosion resistance.
  • Attractive Finish: Dark bronze finish complements commercial door hardware while black rubber provides effective sealing contrast.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Product Category: Door Trim and Accessories
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Bottom Sweeps and Door Shoes
  • Product Type: Door Sweeps and Bottoms
  • Series: Vinyl Door Sweep Series
  • Subcategory: Gaskets & Weatherstripping

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose NGP Quality?

NGP door sweep products deliver professional-grade reliability with aluminum alloy 6063 T5 temper construction and BHMA certification to ANSI/BHMA A156.22 performance standards. The advanced EPDM rubber compound provides exceptional abrasion resistance and temperature performance from -81 F to 275 F for demanding commercial applications. Engineered for long-term weatherproofing performance where dependable door bottom sealing is essential.

Product Specs

Product Group:
Door Trim and Accessories
Series:
Vinyl Door Sweep Series
Product Subgroup:
Door Bottom Sweeps and Door Shoes
Product Type:
Door Sweeps and Bottoms
Subcategory:
Gaskets & Weatherstripping
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

NGP 102VDKB-36 – Frequently Asked Questions

1) What lengths does the NGP 102VDKB vinyl door sweep come in?
The 102VDKB is stocked in 36 inch and 48 inch lengths. A 36 inch sweep covers a standard 3-0 door leaf, and the 48 inch is for wider leaves or for cutting down to an in-between width. Aluminum extrusion like this cuts cleanly with a hacksaw or miter saw, so order the next size up and trim rather than coming up short.
2) Do I need to buy screws separately for this NGP door sweep?
No. The 102VDKB ships with #6 x 3/4 inch stainless steel sheet metal screws. The screw holes are slotted, so you can set the sweep, snug the screws, then slide it up or down to dial in contact with the threshold before final tightening. A snap-on cover hides the screw heads once you are done.
3) Will this NGP sweep hold up in a cold climate or on a hot south-facing exterior door?
The rubber on the 102VDKB is rated from -81 F to 275 F, and it is BHMA certified to the ANSI/BHMA A156.22 performance tests for heat and cold. The seal is a synthetic EPDM in a polypropylene thermoplastic matrix, which is also called out for ozone, sunlight and aging resistance, so a sun-exposed exterior leaf is within what it is built for.
4) What is the closest equivalent to the NGP 102VDKB vinyl door sweep from another manufacturer?
The NGP 102VDKB is an aluminum-retainer door bottom sweep with a flexible insert, supplied in 36 inch and 48 inch lengths with a dark bronze finish and a snap-on cover that conceals the screw heads. The nearest like-for-like part from another brand is the Pemko 345V door bottom sweep, which is also an aluminum retainer sweep but carries a GREENGUARD Gold certified Eco-V insert. The Pemko 56 Series is a second aluminum sweep with the same Eco-V insert, offered in a 36 inch length. Both are surface-applied to the face of the door bottom the same way the 102VDKB is, so the swap is a matter of matching length, finish, and the insert compound you want against the threshold.
5) If the threshold or floor is uneven, is there a better choice than the NGP 102VDKB sweep?
The 102VDKB uses a synthetic EPDM rubber insert in a polypropylene thermoplastic matrix, which seals best against a flat, consistent surface. Where the floor is irregular or the gap under the door varies across the opening, a brush sweep conforms better: the Pemko 29326NB is a 36 inch brush door bottom sweep in clear anodized aluminum with a concealed fastener design, and the Cal-Royal BTN-112 uses an extruded aluminum retainer with a neoprene insert. Brush filaments ride over carpet transitions and high spots that a solid rubber blade would hang up on, at the cost of a less airtight seal than the EPDM blade gives you on a true floor.
6) Will a Pemko 3452 do the same job as the NGP 102VDKB on an exterior door?
Not the same job. The NGP 102VDKB is a door bottom sweep that seals the gap between the door bottom and the floor, with an EPDM insert rated from -81 F to 275 F and BHMA certification to ANSI/BHMA A156.22 heat and cold performance tests. The Pemko 3452 is a surface plate rain drip door bottom, which sheds water running down the face of the door away from the threshold. On a weather-exposed exterior opening the two are commonly used together rather than one in place of the other, since the rain drip does not close the floor gap.
7) Is this a surface-applied sweep or does it replace the door shoe?
It is a surface-applied door bottom sweep. The aluminum retainer screws to the face of the door near the bottom edge and the vinyl seal wipes the threshold or floor below. It does not wrap the bottom edge of the door the way a door shoe does, so you do not have to pull the door off its hinges to install it.
8) Should I use a vinyl sweep like the NGP 102VDKB or a brush sweep?
A vinyl or EPDM blade seal like the 102VDKB gives you a positive wipe against the threshold, so it does better on air and water infiltration at an exterior opening. A brush sweep, such as the Pemko 29326NB or the Cal-Royal BTN-112 with its neoprene insert, drags less and tolerates uneven or carpeted floors better, which is why brush is common on interior and high-cycle doors. Exterior weather seal, go blade. Smoke or dust control over rough flooring, go brush.
9) What else could I use instead of the NGP 102VDKB on a commercial exterior door?
A few surface sweeps cover the same job. The Pemko 345V and the Pemko 56 Series both use the Eco-V insert, with the 345V carrying GREENGUARD Gold certification if you are chasing low-emission credits on the project; the 56 Series is listed in a 36 inch length. If the problem you are solving is rain running down the face of the door rather than air leakage, the Pemko 3452 is a surface plate rain drip door bottom, which is a different fix entirely.
10) Is the NGP 102VDKB rated for commercial traffic, or is it a residential sweep?
Commercial. The retainer is 6063 T5 temper aluminum alloy, which is the standard architectural extrusion temper, and the product is classified commercial rather than residential. It is used on office buildings, schools, healthcare, retail, warehouses, multi-tenant residential and municipal buildings.
11) Is this NGP sweep OK to put on a fire-rated door assembly?
What the 102VDKB carries is BHMA certification to the ANSI/BHMA A156.22 performance tests for heat and cold, and the rubber compound is described as flame resistant. A156.22 is the gasketing and sealing systems standard. Fire door assemblies are governed by the listing on the door and frame, so match the sweep to what your door manufacturer's label permits.
12) I need a sweep for a LEED or low-emitting materials spec - does the NGP 102VDKB qualify, or should I look at something else?
The NGP 102VDKB is certified to ANSI/BHMA A156.22 for heat and cold performance, which speaks to weather sealing rather than material emissions. If the submittal calls specifically for a low-emitting materials certification, the Pemko 345V carries a GREENGUARD Gold certified Eco-V insert, and the Pemko 56 Series uses the same Eco-V insert in a 36 inch length. Both are aluminum retainer surface sweeps that mount to the door face the same way, so substituting for the emissions credit does not change the install.
13) For a 48 inch wide commercial door, which sweeps should I be looking at?
The NGP 102VDKB is stocked in both a 36 inch and a 48 inch length, so it covers a 48 inch leaf without splicing or ordering a longer stock length to cut down. Among the comparable sweeps, the Pemko 29326NB brush sweep and the Pemko 56 Series are each described at a 36 inch length, which suits a standard 36 inch leaf. If the opening is a wide leaf and you want a single continuous piece, the 48 inch 102VDKB is the direct answer.
14) What is the difference between the NGP 102VDKB insert and a neoprene insert sweep like the Cal-Royal BTN-112?
The NGP 102VDKB carries a synthetic EPDM rubber insert held in a polypropylene thermoplastic matrix, a compound chosen for abrasion resistance, tensile strength, memory retention, and resistance to ozone, sunlight, and aging across a -81 F to 275 F range. The Cal-Royal BTN-112 pairs an extruded aluminum retainer with a neoprene insert. Both are flexible blade seals in an aluminum carrier and both mount to the door face; the difference is the elastomer, with EPDM the usual pick where the door sees direct sun and wide seasonal swings.
15) Which door bottom sweep gives the cleanest finished appearance on a storefront or lobby door?
The NGP 102VDKB has a snap-on cover that hides the screw heads and a dark bronze finish that reads with bronze-toned door hardware, plus slotted screw holes so the sweep can be set to height before the cover goes on. The Pemko 29326NB also uses a concealed fastener design, in clear anodized aluminum, which suits mill-finish or clear-anodized aluminum storefront. Pick on finish match to the door and adjacent hardware, since both hide the fasteners.
16) Will the dark bronze finish match the rest of my door hardware?
The 102VDKB is finished dark bronze on the aluminum retainer with a black rubber seal, so it reads as a dark line at the bottom of the door. It sits well with dark bronze or oil-rubbed lever and closer hardware. If your openings are aluminum storefront in clear anodized, a bronze sweep will stand out, and something like the Pemko 29326NB in clear anodized aluminum is the closer match for that look.
How fast can I get the NGP 102VDKB-36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the NGP 102VDKB-36 come with a warranty?
Absolutely. The NGP 102VDKB-36 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the NGP 102VDKB-36?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the NGP 102VDKB-36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!