Klein Tools NCVT-6 Non-Contact...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$124.99
$74.99
Klein Tools NCVT-6 Non-Contact Voltage Tester Pen, 12-1000V AC, with Laser Distance Meter

Klein Tools NCVT-6 Non-Contact Voltage Tester Pen, 12-1000V AC, with Laser Distance Meter

(No reviews yet) Write a Review

Model: NCVT-6
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$124.99
$74.99
Adding to cart… The item has been added
Free Shipping on orders over $99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Non-Contact Voltage Tester Pen, 12-1000V AC, with Laser Distance Meter

  • Warnings

    • Always adhere to local and national safety codes. Use personal protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed.
    • Usage of this tester in any way other than that specified by the manufacturer can impair safe operation, resulting in severe injury or death.
    • Read, understand, and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.
    • LASER RADIATION, Class II laser. DO NOT direct laser beam into eyes, DO NOT stare into the beam, or DO NOT view directly with optical instruments as this can cause severe and permanent eye damage.
    • Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling.

  • Features

    • Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source
    • CAT IV 1000V safety rating
    • Incorporates a 66-Foot (20 m) Laser Distance Meter that can measure in meters, inches in fractions or decimals, and feet in fractions or decimals, with accuracy up to 1/16-Inch (0.16 cm)
    • Lightweight tool with pocket clip for easy everyday carrying and storage
    • Simple-to-use intuitive interface; easy single-button changes between laser distance measurements and voltage detection
    • Built to withstand a 6.6-Foot (2 m) drop
    • Volt Pen detects AC voltage from 12 to 1000V with visual and audible indicators
    • Under normal operating conditions, at distances from 2-Inch to 32.8-Foot the NCVT-6 has an accuracy of +/- 1/16-Inch; and at distances greater than 32.8-Foot up to 65.6-Foot, accuracy of +/- 1/8-Inch
    • Delivers simultaneous visual and audible voltage indicators when AC voltage is detected
    • Non-contact Tester determines AC voltage in cables, cords, circuit breakers, switches, outlets, wires, as well as security, entertainment, communications, environmental control, and irrigation systems
    • Auto Power-Off conserves and extends battery life
    • Laser Distance Measuring, Laser Pointer, Reverse Contrast LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip
    • Laser Class II, 630 to 670nm, Max. Power <1mW
    • High-visibility reverse contrast display for better viewing in low light conditions
    • Screw-thread battery cap
    • Ingress Protection IP40 Dust Resistant


NCVT-6 - spec sheet

Manufacturer Resources

Product Specs

Accuracy:
1/16" from 2" to 32.8'; 1/8" from 32.8' to 65.6'
Batteries:
2 x AAA
Drop Protection:
6.6' (2 m)
Frequency:
50 - 500 Hz
Ingress Protection:
IP40 Dust Resistant
Item Depth:
6.4500 in
Item Height:
1.2100 in
Item Weight:
0.1560 lbs
Item Width:
1.3200 in
Material:
Plastic and Electronic Assemblies
Overall Height:
1.32" (3.4 cm)
Overall Length:
6.45" (16.4 cm)
Overall Width:
1.21" (3.1 cm)
Pollution Degree:
2
Standard:
CATIV 1000V, Laser: Class II, 630nm to 670nm, Max. Power <1mW
Type:
Non-Contact Voltage Tester
Voltage:
12-1000V AC
Weight:
2.5 oz (72 g)
!