You may also like
NON-INS FERRULE 1/0, 50 MM2, LG .70
Manufacturer Resources
Product Specs
- Country Of Origin:
- Germany (DE)
- Product Subgroup:
- Ferrules
- Product Type:
- Non-Insulated Ferrule
- Standards:
- UL E489056
- Wire Size:
- 1/0 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon F9037 – Frequently Asked Questions
1) What wire size does the Sta-Kon F9037 ferrule take?
The F9037 ferrule is sized for 1/0 AWG conductor, which the product data also gives in metric as 50 mm2. If your conductor is stranded 1/0, this is the matching barrel; a 2 AWG or 2/0 conductor needs a different ferrule size, since a ferrule that is oversized will not crimp down reliably and an undersized one will not accept the strands.
2) Does the Sta-Kon F9037 ferrule carry a UL file number for inspection?
Yes. The F9037 is covered under UL file E489056, which is the number to hand an inspector or put on a submittal when the panel or control cabinet build has to show listed terminations.
3) Is the Sta-Kon F9037 ferrule insulated or bare?
Bare. The F9037 is a non-insulated ferrule, so there is no plastic collar on the barrel. You get the strand containment and a clean termination into a terminal block or set screw lug, but any insulation or strain relief at the entry has to come from heat shrink or the device itself. If you want a color-coded insulated collar for wire identification, you need an insulated ferrule instead.
4) What is the Sta-Kon F9037 ferrule made of, and can I use it on aluminum conductor?
The F9037 barrel is copper. That makes it a match for copper stranded conductor. Copper ferrules are not intended for aluminum conductor, which needs a connector rated for aluminum along with the appropriate inhibitor compound, so use a dedicated AL-rated terminal for aluminum feeders.
5) Why use a ferrule on 1/0 stranded wire going into a terminal block instead of just the bare strands?
A ferrule collects all the strands into one solid cylinder so the set screw bears on the barrel rather than on loose wires. On a conductor as large as 1/0, that prevents stray strands, keeps the clamp pressure even, and stops the termination from loosening as the strands settle. The F9037 is the 1/0 AWG (50 mm2) copper version for that job.
6) How do I order the right Sta-Kon ferrule for a 1/0 conductor?
Order by model F9037. That is the manufacturer part number for the non-insulated 1/0 AWG, 50 mm2 copper ferrule. Ferrules are size-specific, so if the cabinet has mixed conductor sizes you will need a separate part number for each gauge.
7) Where is the Sta-Kon F9037 ferrule manufactured?
Germany. Country of origin on the F9037 is listed as Germany (DE), which is the detail that usually matters for a submittal package or a procurement spec with origin reporting requirements.
How fast can I get the Sta-Kon F9037 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon F9037 come with a warranty?
Absolutely. The Sta-Kon F9037 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon F9037?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon F9037 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.