You may also like
NON-INS FERRULE 16, 1.5 MM2, LG .27
Manufacturer Resources
Product Specs
- Country Of Origin:
- Germany (DE)
- Product Subgroup:
- Ferrules
- Product Type:
- Non-Insulated Ferrule
- Standards:
- UL E489056
- Wire Size:
- 16 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon F9007 – Frequently Asked Questions
1) What wire size does the Sta-Kon F9007 ferrule take?
The F9007 wire ferrule is sized for 16 AWG conductor, which is the metric 1.5 mm2 equivalent. If you're terminating stranded 16 AWG control wire into a terminal block or drive input, this is the matching size. Step up or down a ferrule size for 14 AWG or 18 AWG runs.
2) Is the Sta-Kon F9007 ferrule insulated or bare?
Bare metal, no plastic collar. The F9007 is a non-insulated ferrule, so it goes into terminal blocks where the block body or a separate sleeve provides the insulation. If your panel spec calls for color-coded insulated ferrules for wire-size identification, this is not that part.
3) What is the Sta-Kon F9007 ferrule made of, and will it work on aluminum wire?
The barrel is copper, so it is intended for copper conductors. Crimping copper hardware onto aluminum conductor creates a dissimilar-metal joint and is not what this ferrule is built for; use a connector rated for aluminum instead.
4) Does the Sta-Kon F9007 ferrule carry a UL file number for panel inspection?
It does. The F9007 is covered under UL file E489056, which is the number an electrical inspector or panel shop QA will want referenced on your terminations.
5) How long is the crimp barrel on the Sta-Kon F9007 ferrule?
The barrel length is .27 inch. That is the strip length you want on the conductor so the copper fills the barrel without bare strands sticking out past the end into the terminal block.
6) Do I need a special crimper for the Sta-Kon F9007 ferrule?
Yes. Wire ferrules like the F9007 are crimped with a four-indent or hex ferrule crimper, not the oval die used for insulated ring and fork terminals. A pliers-style squeeze gives an uneven barrel that can back out of a screw terminal.
7) Why use a ferrule instead of just putting bare stranded wire into a terminal block?
A ferrule gathers the strands into a solid pin so the screw clamps the whole conductor instead of mashing and shearing individual strands. It also keeps stray strands from bridging to the neighboring terminal. For 16 AWG stranded control wiring in a panel, that is the reason the F9007 exists.
8) Where is the Sta-Kon F9007 ferrule manufactured?
Germany. Country of origin is listed as Germany (DE), which is what procurement needs for origin documentation on government or institutional orders.
How fast can I get the Sta-Kon F9007 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon F9007 come with a warranty?
Absolutely. The Sta-Kon F9007 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon F9007?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon F9007 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.