You may also like
NON-INS LKG FORK TERM 12-10 No6
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Locking Fork Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon C220-TB – Frequently Asked Questions
1) What wire size does the Sta-Kon C220-TB fork terminal take?
The C220-TB is sized for 12-10 AWG conductors. Run a 14 AWG wire into it and the crimp won't hold; step down to a terminal rated for 16-14 AWG instead. For stranded building wire or control wiring in that 12-10 range, it's the right barrel.
2) What stud size does the Sta-Kon C220-TB fork fit?
It's built for a No. 6 stud or screw. The fork slot slides over a #6 terminal block screw without fully removing it, which is the reason to pick a fork over a ring in a crowded panel or terminal strip.
3) Can I use this terminal on a 480V motor control circuit?
The C220-TB carries a 600 V rating, so 120V, 208V, 277V and 480V control and power terminations are all within rating. It is UL recognized under file E9809.
4) Is the Sta-Kon C220-TB insulated?
No. It's a bare, non-insulated copper fork terminal with a metallic finish. If the termination needs strain relief or a color-coded insulated barrel, this isn't it. Where you need insulation on a non-insulated terminal, heat shrink or boot it after crimping.
5) What does the "locking" mean on a locking fork terminal?
The tongue has formed detents at the fork opening that grip the screw head, so the terminal resists backing off the stud under vibration once the screw is tightened. It gives you the quick slide-on access of a spade with more retention than a plain fork.
6) Is the Sta-Kon C220-TB made in the USA?
Yes, country of origin is the United States. That matters on federal, military, and Buy American funded work where domestic sourcing has to be documented on the submittal.
7) Will this crimp with a standard Sta-Kon hand tool?
It's a crimp-style copper barrel for 12-10 AWG, so it takes the yellow-range die on a standard Sta-Kon ratcheting crimper. Match the die to the 12-10 color range, not to the terminal's bare finish, since non-insulated terminals carry no color band of their own.
How fast can I get the Sta-Kon C220-TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon C220-TB come with a warranty?
Absolutely. The Sta-Kon C220-TB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon C220-TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon C220-TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.