You may also like
NONINS TUB RNG TERM NO4 3/8BH 90DEG
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal - 90 Degree Bend
- Wire Size:
- 4/4AN
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon F10731U – Frequently Asked Questions
1) What wire size does the Sta-Kon F10731U ring terminal take?
The F10731U is sized for 4 AWG conductor. It is a tubular barrel terminal, so the stripped 4 AWG conductor seats fully into the barrel before crimping. If you are terminating a different gauge, go to the Sta-Kon part matched to that size rather than forcing a 4 AWG barrel.
2) Is the Sta-Kon F10731U insulated?
No. It is a non-insulated copper terminal, which means the barrel and tongue are bare after crimping. You supply the insulation yourself, normally adhesive-lined heat shrink over the barrel or tape, and you need to confirm clearance to adjacent live parts and the enclosure since there is no factory sleeve doing it for you.
3) Why would I use a 90 degree ring terminal instead of a straight one?
The 90 degree bend turns the conductor a quarter turn at the termination, which is what you want when the stud faces a different direction than the cable run, or when panel depth will not let you make a sweeping bend in 4 AWG copper. A flag or right angle terminal keeps the bend radius out of the equation. If the cable approaches the stud in line with it, a straight tongue terminal is the simpler choice.
4) What material is the F10731U terminal made of, and can I use it on aluminum conductor?
The terminal body is copper. A copper-only terminal is intended for copper conductor; aluminum or copper-clad aluminum needs a connector rated for that conductor to avoid dissimilar-metal problems at the crimp. Keep the F10731U on copper 4 AWG.
5) Do I need a special crimp tool for a 4 AWG Sta-Kon tubular terminal?
Yes, a 4 AWG tubular barrel is well past hand-plier range. Terminations this size are made with a hydraulic or heavy mechanical crimper using the die matched to the terminal, and a full-cycle crimp is what gives you the mechanical pull strength. Budget for the tool and die, because the terminal ships bare with no tooling included.
How fast can I get the Sta-Kon F10731U delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon F10731U come with a warranty?
Absolutely. The Sta-Kon F10731U is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon F10731U?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon F10731U from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.