You may also like
Norton Rixson FM19 Series - Fire Rated - Full Mortise Intermediate Pivots for Heavy Traffic Doors
Model: RIX-FM19
MODEL M19 | INTERMEDIATE OR SIDE JAMB PIVOTS The Norton Rixson M19 is an intermediate, standard-duty full-mortise pivot designed for full surface, flush door, and frame applications. PRODUCT FEATURES...
Norton Rixson
Starting at
$506.00
$288.23
Norton Rixson Model M190 - Heavy Duty Full Mortise Intermediate Pivots
Model: RIX-M190
MODEL M190 | INTERMEDIATE OR SIDE JAMB PIVOTS The Norton Rixson M190 is an intermediate pivot used when the frame condition does not allow a standard top pivot. PRODUCT FEATURES
Norton Rixson
Starting at
$595.13
$339.26
Norton Rixson Model FM190 - Fire Rated - Heavy Duty Full Mortise Intermediate Pivots
Model: RIX-FM190
MODEL M190 | INTERMEDIATE OR SIDE JAMB PIVOTS The Norton Rixson M190 is an intermediate pivot used when the frame condition does not allow a standard top pivot. PRODUCT FEATURES
Norton Rixson
Starting at
$633.00
$360.57
Norton Rixson Model EML19 - Heavy Duty, High Traffic Electrified Intermediate Power Transfer Pivot
Model: RIX-EML19
MODEL E-ML19 | ELECTRIFIED INTERMEDIATE OR SIDE JAMB PIVOTS The Norton Rixson E-ML19 is an offset-hung, electrified power transfer pivot designed for heavyweight or lead-lined high-traffic doors...
Norton Rixson
Starting at
$1,993.00
$1,135.25
Norton Rixson Model 180 - Full Mortise Standard Top Pivot
Model: RIX-180
MODEL 180 | OFFSET HUNG TOP PIVOTS
The Rixson 180 Top Pivot is a standard component designed for compatibility with most offset pivot sets and floor closers. Part of the dependable Rixson 180 line,...
Norton Rixson
Starting at
$342.59
$234.18
NORTON RIXSON M19 INTERMEDIATE PIVOTS
The Norton Rixson M19 is an intermediate, standard-duty full-mortise pivot designed for full surface, flush door, and frame applications.
PRODUCT FEATURES
- 3/4" offset, Standard-Duty Pivot
- Full mortise
- Handed
- Not load-bearing
- Maintains door alignment
- Aids in installing floor closers and bottom pivots
- For 20-minute label suffix “–20” to the part number
- Non-ferrous base metal
- 3/4" (19mm) offset
- Available for 1-1/2" (38mm) offset
- Available for fire door assemblies (ferrous material) – specify FM19
- Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot - each additional 30" (762mm) warrants another intermediate pivot
- Door edges must be beveled in 1/8" in 2"
- Furnished with wood and machine screws
SPECIFICATIONS
- Hang Type: Offset hung
- Warranty: 2-year limited warranty
CERTIFICATIONS
- Environmental Product Declaration (EPD)
RESOURCES & DOWNLOADS
Norton Rixson M19 3/4" Offset Intermediate Pivots Catalog
Norton Rixson M19 3/4" Offset Intermediate Pivots Installation
Norton Rixson Warranty
Manufacturer Resources
Product Specs
- Series:
- M19
- Duty Level:
- Heavy Duty
- Hang Type:
- Offset Hung
- Warranty:
- 2 Year Limited
- Product Group:
- Door Hinges and Pivots
- Product Subgroup:
- Pivots and Pivot Sets
- Product Type:
- Intermediate Pivots - Offset
- Subcategory:
- Intermediate Pivots
- Fasteners:
- Torx Screws Optional
- Commercial/Residential:
- Commercial
- Electronic:
- No
- Pivot Type:
- Top & Bottom
- Mounting Method:
- Center Hung
- Application:
- Standard Door
- Product Attribute:
- Pivots
- Door Hand Direction:
- Handed
- Fire Rating:
- No
- Product Category:
- Door Hinges and Pivots
- Product Substrate:
- Non-ferrous
Norton Rixson M19-RH-605 – Frequently Asked Questions
1) What are Norton Rixson Model M19 intermediate pivots used for?
Norton Rixson Model M19 intermediate pivots provide additional support for heavy traffic doors. They install between the top and bottom pivots to distribute weight and reduce stress on primary pivot points. Essential for doors over 8 feet tall or in high-use applications.
2) Are these pivots compatible with all Norton Rixson pivot sets?
Model M19 intermediate pivots work with most Norton Rixson full mortise pivot systems. Verify compatibility with your specific top and bottom pivot models. Check pivot pin diameter and mortise dimensions match your existing hardware.
3) How do I determine left or right hand for intermediate pivots?
Intermediate pivots follow the same handing as your door system. Stand on the side where the door opens away from you. If hinges are on the right, it's right hand. If hinges are on the left, it's left hand. Order to match your top and bottom pivots.
4) What finishes are available for Norton Rixson M19 pivots?
Norton Rixson M19 pivots typically come in standard architectural finishes including satin chrome, dark bronze, and mill finish. Match the finish to your top and bottom pivots for consistent appearance. Verify specific finish availability when ordering.
5) What weight capacity do M19 intermediate pivots support?
Norton Rixson M19 intermediate pivots are designed for heavy duty applications. Exact weight capacity depends on door height, width, and total pivot configuration. Consult manufacturer specifications and consider door weight distribution across all pivot points.
6) Do these pivots meet commercial building code requirements?
Norton Rixson M19 intermediate pivots are manufactured to commercial grade standards. They help meet code requirements for heavy doors and high traffic applications. Always verify local building codes and ADA compliance for your specific installation.
7) What tools are needed to install M19 intermediate pivots?
Installation requires standard door hardware tools: mortise chisel set, drill with bits, screwdriver, level, and measuring tools. Follow manufacturer template for precise mortise cutting. Professional installation recommended for critical applications.
8) How many intermediate pivots does a heavy door need?
Most applications use one intermediate pivot. Very tall or heavy doors may require two or more intermediate pivots. Space them evenly between top and bottom pivots. Consult Norton Rixson specifications for your door dimensions and weight.
9) Can M19 pivots be adjusted after installation?
Norton Rixson M19 intermediate pivots have limited adjustment capability. Primary door alignment adjustments are made at the top and bottom pivots. Intermediate pivots maintain position and distribute load. Proper initial installation is critical.
10) What's the difference between M19 and other Norton Rixson intermediate models?
Model M19 is the full mortise intermediate pivot in Norton Rixson's heavy duty line. Other models may have different mortise depths, pin sizes, or load ratings. Choose the model that matches your top and bottom pivot specifications.
11) Do environmental conditions affect intermediate pivot performance?
Norton Rixson M19 pivots are built for commercial environments. Extreme temperature changes, moisture, or corrosive conditions may affect performance over time. Choose appropriate finish and consider environmental sealing for harsh conditions.
How fast can I get the Norton Rixson M19-RH-605 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Norton Rixson M19-RH-605 come with a warranty?
Absolutely. The Norton Rixson M19-RH-605 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Norton Rixson M19-RH-605?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Norton Rixson M19-RH-605 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.