Klein Tools 610M Nut Driver Se...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$79.21
$21.41
Klein Tools 610M Nut Driver Set, Magnetic Stubby Nut Drivers, 1-1/2-Inch Shaft, 2-Piece

Klein Tools 610M Nut Driver Set, Magnetic Stubby Nut Drivers, 1-1/2-Inch Shaft, 2-Piece

(No reviews yet) Write a Review

Model: 610M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$79.21
$21.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Nut Driver Set, Magnetic Stubby Nut Drivers, 1-1/2-Inch Shaft, 2-Piece

  • Warnings

    • NOT insulated. Will NOT protect against electrical shock.
    • Always wear approved eye protection.

  • Features

    • Cushion-Grip™ handle allows for greater torque and comfort with handle end that is color coded for easy identification
    • Set contains - 1/4-Inch (Cat. No. 610-1/4M) and 5/16-Inch (Cat. No. 610-5/16M) hex sizes
    • Made in USA
    • Nut driver exclusive hollow shaft design with Rare-Earth magnetic tip features unobstructed pass through
    • Internal flanges provide solid, twist-resistant shaft anchor
    • Stubby nut drivers allow for work in close quarters


610M - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Measurement Standard:
SAE
Overall Length:
3.5" (8.9 cm)
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Height:
1.4000 in
Product Weight:
0.2000 lbs
Product Width:
4.7500 in
Product Depth:
3.5000 in
Product Type:
Nut Driver Set
Country of Origin:
United States

Klein Tools 610M – Frequently Asked Questions

1) Are the Klein 610M stubby nut drivers insulated for live electrical work?
No. The 610M drivers are NOT insulated and will not protect against electrical shock. If you are working on or near energized parts you need a rated insulated tool, not these. Klein also calls for approved eye protection when using them.
2) Will a stubby nut driver reach a hex screw inside a tight panel or junction box?
That is what the 610M set is built for. Overall length is 3.5 inches (8.9 cm) with a 1-1/2-inch shaft, so it turns in close quarters where a full-length nut driver will not clear. The trade-off is reach: in a deep enclosure where the screw sits well below the opening, a standard-length or long-shaft nut driver is the better call.
3) Can the Klein 610M hold a screw on the magnet so I can start it one-handed overhead?
Yes. Each driver has a Rare-Earth magnetic tip, so a hex-head screw stays seated on the bit for one-handed starts on overhead strut, raceway or panel covers. Handy when you are on a ladder and cannot get a second hand on the fastener.
4) Does the shaft on these Klein nut drivers pass over a long threaded rod or stud?
It does. The 610M uses Klein's hollow shaft design with unobstructed pass through, so a bolt or stud can run up inside the shaft while you spin the nut down. Internal flanges anchor the shaft in the handle to resist twisting under torque.
5) How do you tell the 1/4-inch from the 5/16-inch driver quickly on the job?
By the handle end. Both drivers use Klein's Cushion-Grip handle with the end color coded for identification, so you can grab the right size out of a pouch without reading the stamp. The cushion grip also gives you more torque with less hand fatigue.
6) Are Klein 610M nut drivers made in the USA?
Yes, the 610M stubby nut drivers are made in the USA, which matters on public and institutional jobs carrying domestic-content requirements on tooling purchases.
7) How much does the Klein 610M two-piece set weigh and how big is the package?
The set is light, 0.2 lbs, and measures 4.75 x 1.4 x 3.5 inches. Small enough to live in a pouch pocket or a service van drawer alongside a full nut driver set rather than replacing it.
How fast can I get the Klein Tools 610M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 610M come with a warranty?
Absolutely. The Klein Tools 610M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 610M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 610M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!