You may also like
Nuts 5/8-11 Hx Nut Galv (Jar 50)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Fastener Head Height:
- 35/64 in.
- Fastener Head Width:
- 0.922 - 0.938 in.
- Fastener Height:
- 0.535 - 0.559
- Fastener Width:
- 1.051 - 1.083
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell B68-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Nut_Domestic_Gr_2_Gr_5_Gr_8_Gal_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- EA
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 5.75 in
- Product Length:
- 3.5 in
- Product Weight:
- 3.66 lbs
- Product Width:
- 3.5 in
- Remarks:
- The catalog UPC differ from the tarnsaction daat spreadsheet UPC
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 11
- Department:
- Electrical
- Product Subgroup:
- Nuts
- Product Type:
- Hexagonal Nut
- Type2:
- Hexagonal Nut
- Series:
- JN
- Product Finish:
- Galvanized
- Product Details:
- Hexagonal Nut
- Product Material:
- Steel
Metallics JN167G – Frequently Asked Questions
1) How many 5/8-11 galvanized hex nuts come in a jar, and can I buy fewer?
They ship in a jar of 50, and 50 each is the order minimum, so that is the smallest quantity you can take. Other sizes and quantities are available by request.
2) Do these Metallics nuts meet Buy American or ARRA requirements on a government job?
No. The JN167G is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, you need a domestic-marked nut instead.
3) How thick is the JN167G nut, and how much rod does it need past the end?
Nut height is 0.535 to 0.559 inch (listed also as 35/64 in.), so plan on at least that much thread engagement, plus a thread or two proud of the nut face if an inspector is checking full engagement on your rod hangers.
4) Is a galvanized hex nut okay for damp or outdoor locations?
The JN167G is steel with a galvanized finish, which is the usual choice for damp, wet, and exterior runs where plain finish steel would rust. For aggressive chemical or coastal exposure, stainless is the better call, but for ordinary outdoor conduit racks, strut, and equipment mounting, galvanized is the standard spec.
5) What trades use the Metallics JN series hex nuts?
They are stocked for electrical, plumbing, heating, and air conditioning work, the typical uses being threaded rod hangers, strut and channel assemblies, pipe and duct supports, and equipment anchoring.
6) What does a jar of 50 of these 5/8-11 nuts weigh for shipping?
The jar is listed at 3.66 lbs, with jar dimensions of 5.75 by 3.5 by 3.5 inches. Handy if you are staging kits to a truck or figuring a shelf location in the shop.
How fast can I get the Metallics JN167G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JN167G come with a warranty?
Absolutely. The Metallics JN167G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JN167G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JN167G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.