NUVO Lighting 60-214 2 Light, 13in, Flush Mount, Alabaster Glass

The 60-214 takes two medium base (E26) A19 lamps, and bulbs are not included, so order them separately. Each socket is rated 60W max at 120V. Dimming depends entirely on the lamp you install, since the fixture itself has no driver, so pair it with a dimmable lamp if it is going on a dimmer circuit.

It is rated for damp locations and listed for indoor use, so a bathroom ceiling outside the shower spray, a laundry room, or an interior hallway is fine. It is not a wet-location fixture, so do not use it in a shower enclosure or anywhere exposed to direct water or outdoors. Safety listing is cULus.

Plan for a 13.25 inch diameter footprint on the ceiling with a 5.38 inch overall height. That shallow drop is what makes it workable in low-ceiling corridors, closets, and stairwell landings where a semi-flush or pendant would be in the way. The alabaster glass shade itself measures D:9.84 H:3.34.

At 4.24 lbs the 60-214 is well under the 50 lb limit a listed outlet box carries for a luminaire, so a standard ceiling-mounted box is sufficient. It mounts directly to the ceiling box, no fan brace or extra support needed.

For multi-family or hospitality common areas it works as a repeatable spec: one finish (polished brass), a transitional close-to-ceiling profile that reads neutral next to most trim, and two E26 sockets so maintenance stocks one common A19 lamp instead of a proprietary module. Because the lamps are field replaceable rather than integrated LED, a burned-out light is a bulb swap, not a fixture replacement. Housing is steel.

Yes. The fixture is an incandescent-technology luminaire with two E26 medium sockets, not an integrated LED unit, so any A19 lamp with a medium base fits, including LED or CFL retrofits. Stay at or below the 60W rating, which LED A19s do easily. Note that dimming behavior follows the lamp, so choose a dimmable LED if the circuit is on a dimmer.

One configuration: polished brass metalwork with a single alabaster glass shade. There is no alternate finish on this model, so if the opening needs brushed nickel or bronze to match adjacent fixtures, this is not the one. The alabaster glass is a diffusing white rather than clear, so you will not see lamp filaments through it.

Yes, it is flagged for lead under California Prop 65, which matters if you are shipping into California or filing submittals for a public project there. The fixture is also RoHS compliant.

No. There is no CCT selector switch on the 60-214 because it has no integrated LED source. Color temperature is set purely by whichever A19 lamps you install, so if you need 3000K across a corridor, specify the lamps accordingly.