NUVO Lighting 60-317 Ballerina, 3 Light, 24in, Vanity with Alabaster Glass Bell Shades

The Ballerina 3 light vanity measures 24 inches wide, 7.63 inches high, and projects 8.5 inches off the wall. Over a standard 24 inch vanity cabinet it runs the full cabinet width, so if you want the fixture visibly narrower than the cabinet, step up to a wider vanity or down to a smaller fixture. The 8.5 inch extension is worth checking against a mirror or medicine cabinet that projects from the same wall.

Bulbs are not included. You need three medium base (E26) lamps in an A19 shape, and the fixture is rated to 100W per socket at 120V. Order the bulbs with the fixture or the job stalls at trim-out.

No. The Ballerina vanity carries a damp location rating and is listed for indoor use only, so it goes over a sink or on a bathroom wall where it may see humidity, not inside a shower or tub enclosure or anywhere it can take direct water. A wet location rated fixture is required for those spots.

No. This fixture is not ADA compliant, and with an 8.5 inch projection from the wall it exceeds the 4 inch limit for objects mounted between 27 and 80 inches above the floor in a circulation path. Over a vanity or sink, where the counter blocks approach, that projection usually isn't the governing issue, but for accessible-unit specs or corridor mounting you need an ADA-rated fixture instead.

It carries a cULus safety listing, which covers both US and Canadian requirements, and the fixture is RoHS compliant. Note the California Prop 65 disclosure for lead, which matters if you're shipping to or specifying for a California project.

It's a wall mount fixture built to go either up or down, so you can orient the three alabaster bell shades shade-up for a softer wash off the ceiling or shade-down for more task light at the sink. Same fixture either way, you just rotate it at install.

Polished chrome is the only finish this one is built in. The body is metal with three alabaster glass bell shades, so it pairs with chrome faucets and towel bars in a traditional bath. If your units are standardized on brushed nickel or bronze, this fixture won't match and you'd want a different finish family.

Yes. The sockets are medium base E26 rated to 100W maximum each, so any A19 LED lamp with an E26 base drops straight in and will draw well under that limit. The 100W figure is a ceiling, not a requirement. There is no color temperature selection built into the fixture, so the light color is whatever the lamps you choose are.

The fixture weighs 7.15 lbs. That's within the range a standard fixture-rated wall box and strap handle without additional blocking. It mounts over a single wall outlet box on 120V.