NUVO Lighting 60-6075 Ballerina, 3 Light, 24in, Vanity with Alabaster Glass Bell Shades, Color retail packaging

The Ballerina 3-light vanity measures 24 inches wide, 7.63 inches high, and projects 8.5 inches off the wall. Over a 24 inch mirror it lines up edge to edge; most installers prefer the fixture a little narrower than the mirror, so if you want visible mirror on both sides step up to a wider bar. Watch the 8.5 inch extension if the fixture sits near a swinging door or a medicine cabinet.

Bulbs aren't included. You'll need three A19 lamps with an E26 medium base, rated to 120V, and no more than 100W each per the fixture's wattage rating. Order them separately; for a multi-unit job that is three lamps per fixture.

It carries a damp location rating and is listed for indoor use only, with cETLus safety listing. Damp covers a typical bathroom wall over a vanity where it sees humidity. It is not wet rated, so do not install it inside a shower enclosure or directly over a tub where it would take direct spray or dripping water; that calls for a wet-rated fixture.

No. The Ballerina is not ADA compliant, and with an 8.5 inch projection off the wall it exceeds the 4 inch protrusion limit that applies to fixtures mounted in the protruding-object zone of a circulation path. For accessible restrooms and corridors, specify an ADA-compliant shallow-projection sconce instead. Above a vanity countertop, outside the path of travel, projection is usually not the governing issue.

Yes. It is a wall-mounted fixture classed for up or down orientation, so the three alabaster glass bell shades can face up for softer bounced light or down to put light directly on the vanity. Mounting the same fixture both ways across a building is useful when some rooms have a low ceiling that limits uplight clearance.

Yes. The Ballerina 60-6075 is listed with lead as a CA Prop 65 chemical, so a Prop 65 warning applies for California jobs and procurement paperwork. It is RoHS compliant.

Brushed nickel is the finish, on a steel base with alabaster glass bell shades. Steel body rather than plastic, which matters in multi-family turns where fixtures get knocked. Style is traditional, so it reads alongside existing brushed nickel faucets and cabinet hardware.

The fixture weighs 5.88 lbs, which is well within what a standard wall box and strap will carry for a wall sconce. It mounts to the wall at 120V. For volume installs that weight also keeps freight and handling down on pallet quantities.