NUVO Lighting 60-4083 Bento, 3 Light, Vanity Fixture with Satin White Glass

Bulbs are not included. You need three A19 lamps with a medium E26 base, rated up to 100W each on 120V. Any standard LED or CFL A19 in that base will work; the socket limit is what caps your wattage.

The Bento carries a damp location rating and is an indoor fixture, which covers typical bathroom humidity above a vanity. It is not wet-rated, so do not install it inside a shower enclosure or anywhere it can take direct spray. It is cULus safety listed.

No. The Bento 60-4083 is not ADA compliant, and its 7 inch extension from the wall exceeds the 4 inch projection limit that governs objects mounted in a circulation path. For accessible restrooms or corridors, specify a fixture listed as ADA compliant. Above a vanity countertop, outside the protruding-object zone, that limit generally does not apply.

Polished Chrome is the finish offered on the 60-4083, paired with satin white glass. It reads as a bright mirror chrome, so it pairs with polished chrome faucets and tub trim rather than brushed nickel, which is a warmer satin gray. The fixture body is glass and steel.

The Bento mounts to a standard wall junction box using a mounting ring. The fixture weighs 9.58 lbs, well within the load an ordinary fixture-rated box and strap will carry, so no special support is required. Three sockets on 120V means one switched hot, neutral, and ground at the box.

It is an incandescent-technology fixture with three screw-in medium base sockets, not an integrated LED. That is an advantage for property managers and MRO buyers: when a lamp fails you change a bulb instead of the whole fixture, and you can put LED A19 lamps in it to cut energy use.

Each of the three satin white glass shades measures 5.38 by 5.38 by 6.16 inches. That matters if you are mounting the fixture close to a mirror edge or a side wall, since the end shade needs clearance for its full 5.38 inch footprint beyond the 22 inch overall width reference point.

No, there is no CCT selector on the Bento. Color temperature is set entirely by the A19 lamps you install, so to standardize the look across a building, buy all three bulbs per fixture at the same Kelvin rating, typically 2700K or 3000K for bathrooms.

Yes. The 60-4083 is listed with lead as a CA Prop 65 chemical, which is common for brass and plated steel lighting components. The fixture is also RoHS compliant.