NUVO Lighting 60-4085 Bento, 3 Light, Chandelier with Satin White Glass

Bulbs are not included. You need three A19 lamps with a medium E26 base, 60W maximum each, on 120V. Standard incandescent is the listed technology, but any A19/E26 lamp within 60W works, including LED replacements. Dimming depends entirely on the lamp you choose, so if the fixture is going on a dimmer, pick a lamp rated dimmable and match the dimmer to it.

No. The Bento 3-light is an indoor fixture with a Dry location rating only, so it cannot be used outdoors, under a covered exterior ceiling, or in a bath/shower zone where a damp or wet rating is required. For a porch or a tub surround you need a fixture rated damp or wet.

It carries a cETLus safety listing, which covers both US and Canadian requirements, and the fixture is RoHS compliant. Note the CA Prop 65 disclosure for lead, which matters if you're specifying into a California project.

The Bento 60-4085 weighs 10.38 lbs and hangs from a chain off the ceiling. That is within what a fixture-rated outlet box will support, but a box that is only device-rated or a loose old-work box should be replaced with a fixture- or fan-rated box secured to framing before hanging it.

Included are one 48 inch chain and one 12 ft length of supply wire. Lamps are not included, and any sloped-ceiling adapter or extra chain for a taller drop is a separate order.

One configuration: Polished Chrome metal with satin white glass, three shades. The body is glass and metal construction in a contemporary style from the Bento collection. If your other openings or fixtures are brushed nickel or bronze, this chrome will not match them.

Neither. The Bento 3-light uses replaceable lamps rather than an integrated LED engine, and there is no CCT selector switch. Color temperature is whatever you install in the three E26 sockets, which is an advantage if you're standardizing a building on one lamp spec.