NUVO Lighting 60-4968 Boxwood, 3 Light, 26in, Outdoor Wall with Clear Beveled Glass

Yes. The Boxwood 60-4968 carries a Wet location rating and is listed for outdoor use, so it can go on an open wall, a gable end, or anywhere without overhead cover. It is cULus safety listed at 120V.

Plan for a fixture 26.25 inches high and 13 inches in diameter, projecting 12.5 inches off the wall face. That projection is the number that usually causes trouble: beside a door swing, on a narrow entry pilaster, or along a walkway it is a substantial reach, and at 11.03 lbs the mounting point needs to be solid, not just a plastic old-work box.

Bulbs are not included. It takes three E12 candelabra base lamps, type B shape, 60W maximum each. Buy them separately, and for a multi-unit property order spares at the same time since three lamps per fixture adds up fast.

No. The Boxwood 60-4968 is not ADA compliant, and with 12.5 inches of projection it is not a candidate for a path of travel where protruding objects are restricted. For corridors, stairwells, and walkways under an ADA review, specify a shallow-projection sconce instead and keep this one for entries, garage walls, and recessed porches where the reach is clear.

Dimming is lamp dependent on this fixture, meaning there is no driver in it to limit you. The housing is wired for 120V incandescent service with candelabra sockets, so whether it dims comes down to the lamps you install. Put in dimmable candelabra lamps and a compatible dimmer and it dims; non-dimmable LED candelabra lamps will not.

Rustic Bronze is the finish, on a glass and metal body in a traditional style with clear beveled glass panels. It is a single-finish item, so if you are standardizing across a property, every unit you order will match. The clear beveled glass means the lamps are visible, so use the same lamp type in every fixture or they will read differently from the street.

Neither. The Boxwood 60-4968 is an incandescent-technology fixture with three 60W candelabra sockets and no CCT selection, since there is no integrated LED board to switch. Color temperature is entirely down to the lamps you choose, which also means you can retrofit warm or neutral LED candelabra lamps later without changing the fixture.

It is built as a single glass assembly with one shade, not three separate panes, and that single piece measures 0.16 x 5.34 x 9.41 inches per the shade spec. One unit holds all three candelabra lamps behind the clear beveled glass. Worth knowing on a rental property: damage to the glass is damage to the one glass element, not one of three.

Lead is the listed California Prop 65 chemical for this fixture, so a Prop 65 warning applies for California jobs. It is RoHS compliant. Institutional buyers who keep chemical disclosure records on specified materials should log the lead entry with the submittal.