NUVO Lighting 60-4969 Boxwood, 3 Light, 26in, Outdoor Wall with Clear Beveled Glass

Yes. The Boxwood 60-4969 carries a Wet location rating and is built for outdoor use, so it can go on an exposed wall, under no soffit, where it takes direct rain. Safety listing is cULus. Base material is glass and metal, finish is Textured Black.

Bulbs are not included. You need three E12 candelabra-base lamps, Type B shape, rated up to 60W each on a 120V circuit. Buy the lamps on the same order or the fixture goes up dark.

Plan for a fixture 26.25 inches tall and 13 inches in diameter, projecting 12.5 inches off the wall. That projection is the number that matters next to a door swing, a walkway, or a narrow entry pilaster, and the 13 inch diameter rules it out of tight sidelight reveals. It weighs 11.03 lbs, so the outlet box needs to be fixture-rated and solidly anchored.

No. The Boxwood 60-4969 is not ADA compliant, and with a 12.5 inch projection it exceeds the 4 inch protrusion limit for mounting between 27 and 80 inches above a circulation path. Use it on a building exterior facade, entry pilaster, or garage wall where it is clear of walking routes, and specify a shallow ADA sconce where protrusion is regulated.

Dimming is lamp dependent. The fixture itself has no driver, it is an incandescent-technology lantern with three candelabra sockets, so if you install dimmable incandescent or dimmable LED candelabra lamps on a compatible 120V dimmer it will dim. Non-dimmable LED lamps will not.

It is part of the NUVO Boxwood collection in a Traditional style with Clear Beveled glass and a Textured Black finish, so it matches on other Boxwood pieces specified in the same finish. For a fleet standardization across building entries, the identifier to spec is 60-4969.

No. CCT is not selectable because this is a lamped incandescent fixture, not an integrated LED. Color temperature is whatever the three candelabra lamps you install provide, which also means you can change the look later by swapping lamps.

Yes, lead is the listed CA Prop 65 chemical for this fixture. It is RoHS compliant. Institutional and government buyers who need the disclosure in their submittal package should carry the lead warning through.

It is a wall-mount lantern, one shade with one glass assembly in Clear Beveled finish, measuring D:0.16 W:5.34 H:9.41. With a single glass unit rather than separate panes, a break means replacing one piece rather than matching a multi-panel set.