NUVO Lighting 60-5033 Patton, 3 Light, Vanity Fixture with Frosted Glass

It is rated for damp locations and indoor use only, so it is fine for a typical bathroom with shower steam, mounted on the wall above the vanity or mirror. It is not a wet-location fixture, so keep it out of direct spray inside a shower enclosure and off exterior walls or open porches.

Bulbs are not included. You need three A19 lamps with a medium E26 base, rated up to 100W each on 120V. Any standard-base LED or CFL A19 in that envelope works; dimming depends entirely on the lamp you choose, since the fixture itself has no driver, so pair a dimmable LED with a compatible dimmer if you want control.

No. The Patton 60-5033 is not ADA compliant, and its 7.5 inch projection is the reason it will not pass in a corridor or any location where protruding-object limits apply. For a restroom where the fixture sits above the lavatory and outside the protrusion zone it is commonly acceptable, but if your spec calls out ADA hardware you need a shallow-projection fixture instead.

Brushed nickel is the finish on the 60-5033, over a steel body. It is a transitional-style bar, so it reads neutral next to brushed nickel faucets and cabinet pulls, which makes it an easy standardization pick across apartment or hotel bathrooms.

The fixture carries a cETLus safety listing, which covers both US and Canadian installations, and it is RoHS compliant. Note that it carries a California Prop 65 notice for lead, which matters if your project requires Prop 65 disclosure documentation.

At 7.29 lbs the 60-5033 is light enough to hang from a standard 4 inch round or octagon wall box with the supplied crossbar. No added blocking is normally needed, though a loose or old box should be secured before mounting a 21 inch bar.