NUVO Lighting 60-5131 Patton, 1-Light, Vanity Fixture with Frosted Glass

The Patton 60-5131 is damp location rated and indoor only, so it's fine over a vanity or sink in a bathroom where it may see steam and humidity. It is not wet location rated, so keep it out of direct spray, such as inside a shower or tub enclosure, and do not use it outdoors.

Bulbs are not included. The Patton 60-5131 takes one A19 lamp with an E26 medium screw base, rated up to 100W at 120V. An LED A19 in a medium base works too, as long as you stay within that wattage limit.

Plan for a fixture 11 inches high with a 5.5 inch diameter, projecting 8 inches off the wall. That 8 inch extension is worth checking against a mirror edge, medicine cabinet door swing, or a narrow powder room where someone leans into the mirror. The shade itself measures W:5.50 H:5.25.

No. The Patton 60-5131 is not ADA compliant, and its 8 inch projection exceeds the 4 inch limit for wall mounted objects in a circulation path. For accessible restrooms and corridors in healthcare, education, or government work, specify an ADA rated vanity or sconce instead. It is a good fit for residential and multi-family units where the fixture sits over a counter.

Yes. The Patton 60-5131 is a wall mounted single light that can be installed facing up or down, so you can wash light toward the ceiling or aim it down at the counter. Mounting orientation is the installer's call on site, which makes it easy to match the direction of existing fixtures on other openings in the same building.

It carries a cETLus safety listing, which covers both US and Canadian requirements, and the fixture is RoHS compliant. Note that it is flagged under California Prop 65 for lead, which matters if your project requires Prop 65 disclosure.

The Patton 60-5131 is offered in Prairie Bronze with a single frosted glass shade, in a transitional style. Body construction is glass and metal, and the whole fixture weighs 2.46 lbs, light enough to land on a standard wall box with no extra bracing.