NUVO Lighting 60-532 1-Light, 10in, Rectangle Cage Bulk Head, Die Cast Bulk Head

Yes. The 60-532 cage bulkhead is rated for wet locations and is built for outdoor use, with a cETLus safety listing. Wet rating means direct exposure to rain and splash is acceptable, so exterior walls, loading docks, stairwells and entry doors are all fair game.

No lamp is included. The 60-532 takes one A19 bulb with an E26 medium base, rated to 60W on 120V. Buy the lamps separately and order them to match the fixture count on your job.

No. The 60-532 is not ADA compliant. With a 4.88 inch projection it can exceed protruding-object allowances when mounted in the 27 to 80 inch zone along an accessible route, so for those locations pick a fixture specifically listed as ADA compliant. Above 80 inches or on a wall outside the route it is not an issue.

The socket is a 120V E26 medium base sized for an A19 lamp, so any LED A19 in that base fits, as long as you stay at or below the 60W fixture rating (an LED equivalent draws far less than that). Just confirm the LED you pick is rated for enclosed and damp or wet use, since the lamp sits behind a sealed clear ribbed glass lens on an outdoor fixture.

It is specified as a wall mount fixture only. The 60-532 die cast bulkhead is intended for vertical surfaces, so for a soffit or overhead application choose a fixture listed for ceiling mounting instead.

Housing is die cast aluminum in a semi gloss white finish, paired with one clear ribbed glass lens behind a rectangular cage. Aluminum will not rust like steel, and the cage guards the glass in places where the fixture takes knocks, which is why bulkheads like this get used on garages, service corridors, and multi-family exterior walkways.

Semi gloss white is the only finish offered for the 60-532, so if your existing exterior fixtures are bronze or black this one will not match. Part number for ordering is 60-532 from NUVO Lighting.

Yes, the 60-532 carries a California Proposition 65 warning for lead. It is also RoHS compliant. Institutional and government buyers who track Prop 65 disclosures on incoming material should log this one.

The fixture weighs 4.41 lbs. That is well within what a properly secured weatherproof outlet box on a wall will support, and light enough for a single installer to hold while making up the connections.

No. There is no CCT selection on the 60-532 because it has no integral LED module; it is a lamp-holder fixture. Color temperature is whatever bulb you screw into the E26 socket, which means you can standardize a whole property to one CCT by buying the lamps in bulk.