NUVO Lighting 60-5413 Vintage, 1-Light, Sconce with Clear Glass, Vintage Lamp Included

The 60-5413 carries a damp location rating and is listed for indoor use, so it can go in a bathroom where it may see humidity, but not in a wet location like inside a shower enclosure or anywhere exposed to direct water. It is cULus safety listed. Mounting is wall only.

No. The 60-5413 is not ADA compliant, and with a 7.88 inch extension it protrudes well past the 4 inch limit for objects mounted between 27 and 80 inches above the floor in a circulation path. For an accessible corridor or a government, healthcare, or school project, specify an ADA sconce with a shallow profile instead. It is fine in guest rooms, over vanities, or anywhere outside the required path of travel.

It ships with one 60W incandescent lamp in an ST19 vintage shape on a medium E26 base, 120V. For replacements, any E26 medium base lamp works. Note the fixture's rated bulb wattage is 40W per the fixture spec with a 100W fixture rating, so match whatever is printed on the socket label when you re-lamp. LED filament ST19 bulbs in E26 are the common swap for rental turns.

Yes, it is an up or down wall fixture, so the same unit can be installed with the clear glass shade facing up for ambient wash or down to put light on a vanity or a work surface. Decide orientation at install, since it changes how the bare ST19 filament lamp reads through the clear glass.

Polished Nickel is the finish on the 60-5413. It is part of NUVO's Vintage collection, so pendants and multi-light fixtures from that same collection in Polished Nickel are the route to a matched set across a lobby, corridor, and baths. Construction is glass and metal.

Yes. The 60-5413 is identified as containing lead under California Proposition 65, so it needs the Prop 65 notice on California jobs and in California-facing documentation. The fixture is RoHS compliant.