NUVO Lighting 60-5512 Vintage, 1-Light, Sconce with Clear Glass, Vintage Lamp Included

Yes, within limits. The 60-5512 carries a damp location rating and a cULus safety listing, so it is suitable for a bathroom or vanity wall where it may see humidity, but not a wet location like a shower enclosure or an exterior wall. It is an indoor-only fixture and NUVO lists it in the vanity and wall category.

No. The 60-5512 is listed as not ADA compliant, and with a 7.63 inch extension it projects too far to sit along an accessible corridor path. For halls and stairwells on an accessible route, specify an ADA rated wall sconce that stays within the protrusion limit and keep this one for rooms, entries, and vanity walls.

One 40W incandescent lamp ships with the fixture, an ST19 vintage style bulb on a medium E26 base at 120V. When you relamp, any E26 medium base lamp rated 120V works, and the fixture itself is rated up to 100W, so you have headroom above the 40W it arrives with. The ST19 shape is what gives it the exposed vintage filament look through the clear glass.

It can go either direction. NUVO classifies the 60-5512 as a wall up or down sconce, so the same fixture works with the shade aimed up for ambient wash or aimed down for task light over a vanity or along a counter. It is a wall mount fixture only, not ceiling rated.

Glass and steel construction, with a clear glass shade over a Rustic Bronze metal body. Fixture weight is 3.29 lbs, light enough to land on a standard wall box with the supplied crossbar hardware. Rustic Bronze is the only finish for the 60-5512, which matters if you are matching a run of sconces across multiple units.

Yes. Lead is listed as a Prop 65 chemical for the 60-5512, so the warning applies on shipments into California. The fixture is RoHS compliant separately, which covers restricted substances in the components themselves.

No. The 60-5512 has no CCT selector switch, because it is an incandescent fixture with no integral LED module. Color temperature is set entirely by the bulb you install on the E26 socket, so if you need a specific color temp across a building, standardize on the lamp rather than the fixture.