NUVO Lighting 60-6083 Ballerina, 3 Light, 24in, Vanity with Frosted White Glass, Color retail packaging

Yes for a normal bathroom vanity wall. The Ballerina 3-light vanity carries a Damp location rating and is an indoor fixture, so it handles the humidity above a mirror or sink. Damp does not cover direct water contact, so don't put it inside a shower or tub enclosure where a wet-location fixture is required.

Bulbs are not in the box. You need three medium base (E26) lamps, A19 shape, rated up to 100W each. Budget for that when you're outfitting multiple units, because a bath remodel or a unit turn will need the lamps ordered separately.

No. The Ballerina 3-light vanity is not ADA compliant, and with an 8.5 inch projection it sticks out well past what an ADA protruding-objects rule allows in a corridor or accessible restroom. For accessible units or common-area restrooms, specify an ADA-listed vanity or sconce instead. For standard residential baths in an apartment or hotel it's not an issue.

Dimming is lamp dependent. The fixture itself is an incandescent-technology vanity with no driver of its own, so whether it dims comes down to the A19 bulbs you install. Standard incandescent or halogen A19s dim on a common wall dimmer; if you put in LED A19s, they have to be marked dimmable and matched to the dimmer type.

It's a wall-mounted fixture built to run either direction, listed as up or down. That gives you a choice at install: shades up for a softer wash off the ceiling, shades down for more direct light on the sink. Decide before you set the mounting strap so the wiring and the canopy orientation line up.

The fixture is cETLus listed, which covers both US and Canadian requirements, and it's RoHS compliant. It runs on standard 120V line voltage, so it wires to a normal branch circuit with no transformer or driver. Note it carries a California Prop 65 lead warning, which matters if you're shipping into California.

The 24 inch width and 7.63 inch height give you a reasonable footprint to hide patched drywall from a smaller bar, but the fixture centers on the existing box, so any old anchor holes outside that 24 by 7.63 inch envelope will still show. Measure from your box center out before you pull the old fixture. Nothing about the install changes electrically: it's 120V, three E26 sockets, standard wall mount.

At 5.88 pounds it's light. A properly secured standard wall box will carry it with no added blocking or a fixture-rated fan box. For a property manager doing unit turns, that means a straight swap onto existing boxes as long as the box is solidly anchored.