NUVO Lighting 60-6125 4-Light, Sherwood Pendant, Iron Black with Brushed Nickel Accents Finish, Frosted Etched Glass

Four medium E26 base lamps, A19 shape, 60W maximum each at 120V. No bulbs are supplied, so order lamps separately. Any standard A19 medium-base lamp works, including LED and CFL retrofits rated at or below 60W equivalent draw.

No. It is an indoor fixture with a Dry location rating only. That rules out covered porches, open breezeways, and any damp spot such as directly over a tub or shower or in an unventilated bathroom. For those locations you need a fixture carrying a Damp or Wet location listing.

The fixture weighs 22.57 lbs and hangs by chain from the ceiling. A standard non-structural outlet box is not sufficient at that weight. Use a fan-rated or fixture-rated box secured to framing, or a listed bar hanger, which carries 50 lbs and up. Confirm the existing box is rated for the load before hanging rather than after.

One 48 inch chain and one 12 ft length of supply wire ship with the fixture, along with the steel frame and the satin white etched glass shades. Bulbs are not included, and neither is a ceiling box or mounting bar, so plan on four A19 medium-base lamps and whatever box or hanger the ceiling needs.

The Sherwood pendant is cETLus listed, which covers both US and Canadian requirements for an indoor dry-location luminaire, and it is RoHS compliant. Note the fixture carries a California Prop 65 notice for lead.

The Sherwood pendant is finished iron black with brushed nickel accents, a transitional two-tone look, with satin white etched glass. It reads as a deliberate mixed-metal fixture, so it sits comfortably in a room with either black or brushed-nickel plumbing and door hardware. There is one finish option on the Sherwood 4-light, so if you are standardizing across several units in a building you will get the same combination each time.