NUVO Lighting 60-6432 Lansing, 1-Light, Mini Pendant with Etched Opal Glass

It takes a single A19 lamp with an E26 medium screw base, rated up to 100W at 120V. No bulb is included, so order lamps separately. Dimming depends entirely on the lamp you install, the fixture puts no limit on it either way.

No. The Lansing mini pendant is rated for dry locations and indoor use only, so a covered porch, a shower area, or anywhere subject to damp is out of scope. For those spots you need a fixture carrying a damp or wet location rating.

Each one is 5.25 inches in diameter, so spacing is driven by that small footprint rather than the fixture body. Property managers running a row over an island typically set them 24 to 30 inches on center, which leaves clear space between 5-1/4 inch shades. Each is a single-lamp fixture, so count one lamp per pendant when you size the circuit against the 100W maximum.

Rod mount to the ceiling. It uses rigid downrods, not an adjustable cord, so the pendant hangs plumb and will not swing. That also means a sloped ceiling needs a canopy that can accommodate the pitch, since the rods set a fixed vertical drop.

It carries a cETLus safety listing, recognized in both the US and Canada, and is RoHS compliant. Weight is 5.04 lbs, which any standard ceiling outlet box rated for luminaires will carry without a fan brace or extra support.

One configuration: Midnight Bronze over a steel body, with an etched opal glass shade. The opal glass diffuses the lamp rather than leaving it exposed, so it reads softer than a clear-glass pendant over a seating area.

Yes, it is listed with lead as a Prop 65 chemical. For California jobs that means the warning must accompany the product, something institutional and government procurement buyers usually need documented up front.