NUVO Lighting 60-6651 Chassis, 1-Light, Wall Sconce, Copper Brushed Brass Finish with Matte Black Frame

Yes, within limits. The Chassis 60-6651 carries a damp location rating and is classified for indoor use, so a bathroom or vanity wall is within its rating as long as it is not in a wet spot like directly in a shower or exposed to weather. NUVO groups it under vanity and wall fixtures, and at 7.5 inches wide with a 5 inch height it sits well beside or above a mirror.

Bulbs are not included, so order lamps separately. The socket is a medium E26 base, the fixture is rated to 60W maximum at 120V, and NUVO specifies a G25 globe shape for the single lamp position. A G25 is the round globe bulb commonly used where the lamp is visible, which it is on this fixture.

No. The Chassis 60-6651 is listed as not ADA compliant, and its 4.63 inch projection is the reason it will not satisfy the usual 4 inch limit for objects mounted in a circulation path below 80 inches. For an ADA corridor application you need a sconce with 4 inches or less of extension.

Dimming depends entirely on the lamp you install. The 60-6651 has no driver or integral LED, it is an incandescent-technology fixture with a plain E26 socket on 120V line voltage, so a standard incandescent G25 bulb dims on an ordinary forward-phase dimmer. Put a non-dimmable LED G25 in it and it will not dim.

Extension off the wall is 4.63 inches, with an overall footprint of 7.5 inches wide by 5 inches high. That projection matters in a tight hallway or beside a door swing, and it is also what to check against mirror frames and medicine cabinet doors in a vanity install.

No, there is no CCT selection on this fixture because the light source is not integral. Color temperature is whatever G25 lamp you screw into the E26 socket, so if a project spec calls for 3000K across the building, buy the lamps to that spec and install them in every fixture.

Steel construction, finished in copper brushed brass with a matte black frame, and it weighs just 1.05 lbs. At that weight it hangs off a standard wall box without blocking or extra support, which makes it straightforward for multi-family or hospitality rollouts where crews are swapping many fixtures in a day.

The Chassis 60-6651 is a single configuration: copper brushed brass with a matte black frame. If you need a uniform look across a building, order this part number for every opening rather than mixing in another Chassis finish code.