NUVO Lighting 60-6855 Spyglass, 1-Light, Wall Sconce Fixture, Vintage Brass Finish with Clear Glass

Yes, within limits. The Spyglass sconce carries a Damp location rating and is listed for indoor use, so it works over a vanity or in a bathroom where it will not be hit by direct water spray. It is not rated for wet locations or exterior use. Note it is not ADA compliant, and with a 6.5 inch extension off the wall it projects too far for ADA-restricted corridor mounting heights.

Bulbs are not included. You need one E12 candelabra base lamp, Type B shape, at up to 60W on 120V. Order the bulbs separately when you spec the fixture, otherwise the job stalls at trim-out.

The Spyglass sconce is cETLus listed, which covers both US and Canadian requirements, so it satisfies the listed-luminaire requirement inspectors look for on multi-family and commercial interior work. One procurement note: it is flagged for lead under California Prop 65, which matters if you ship into California facilities.

It is a wall-mounted fixture wired for 120V line voltage, so it lands on a standard wall outlet box. At 1.42 lbs the fixture is light enough that no supplemental blocking or bracing is needed beyond the box itself.

The 60-6855 is built in Vintage Brass with a clear glass cylinder, and that is the only finish this model is offered in. It belongs to NUVO's Spyglass collection, so it is the one-light wall sconce you pair with other Spyglass pieces when you are standardizing a hall or bath on a single look.

Steel body with a glass shade. For rental turns and multi-family corridors that steel base holds up better than a resin housing, and the shade is clear glass rather than acrylic, which means it cleans with glass cleaner and will not haze over time.