NUVO Lighting 60-6879 Alondra, 1-Light, Wall Sconce Fixture, Black Finish with Clear Glass

Yes. The Alondra 1-light sconce carries a damp location rating, so a bathroom vanity or powder room is within its rating. It is an indoor fixture only, so it should not go on an exterior wall or anywhere exposed to direct water. Note it is not ADA compliant, and with a 7 inch extension off the wall it projects more than the 4 inch limit ADA imposes on wall-mounted fixtures in circulation paths, so keep it out of corridors where that matters.

Bulbs are not included. It takes one A19 lamp with an E26 medium base, rated up to 60W at 120V. Any standard-shape LED or incandescent A19 with a medium screw base will work. If you are relamping a building, order lamps separately by the fixture count.

Dimming is lamp dependent. The fixture has no integrated driver or LED engine, it is an incandescent-technology socket fixture, so whether it dims comes down to the A19 lamp you put in it. A standard incandescent A19 will dim on a common forward-phase dimmer; an LED A19 only dims if that lamp is marked dimmable and is matched to the dimmer.

It is cETLus listed, which covers both US and Canadian requirements, so it satisfies the listed-fixture requirement inspectors look for in multi-family and commercial interiors. It is a 120V, indoor, damp-rated wall fixture.

It is a wall-mount fixture wired for 120V, so it mounts over a standard wall-mounted outlet box. At 2.47 lbs it is light enough that a normal box and strap carry it without blocking or added support, which is what makes it practical for unit-by-unit replacement work.

One configuration only: black finish with clear glass. The frame is steel and the shade is glass, a traditional-style cylinder. If you are standardizing a corridor or a block of units, every fixture you order on this model will match.

Yes. Lead is identified as a CA Prop 65 chemical for this fixture, so California jobs need the warning carried through on the submittal and the delivery paperwork.

No. There is no CCT selector switch, because the fixture has no integrated LED, it is a socketed incandescent-technology fixture taking one E26 A19 lamp. Color temperature is whatever lamp you install, so pick the lamp CCT to match the rest of the building.