NUVO Lighting 60-7101 Skybridge, 1-Light, Vanity Fixture, Matte Black Finish with Clear Glass

The Skybridge 60-7101 is rated for damp locations and indoor use only, so it's fine over a vanity or sink where it sees humidity from a shower. It is not wet-rated, so keep it out of direct spray, like inside a shower or tub enclosure, and off exterior walls.

You supply the bulb. It takes one A19 lamp with a medium E26 base, rated to a maximum of 60W on 120V. Bulbs are not included, so order lamps separately when you're stocking a job or a unit turn.

No. The Skybridge 60-7101 is not ADA compliant, and with 6.75 inches of projection it exceeds the 4 inch protrusion limit ADA applies to objects mounted in the 27 to 80 inch range along a circulation path. For an ADA-governed corridor or restroom wall, specify a shallow-projection ADA-listed sconce instead.

Yes, and that's a common approach with this one. The Skybridge 60-7101 is a single-light wall fixture with one cylindrical clear glass shade, only 5 inches wide, so two or three mounted on separate boxes spaced over each sink reads cleanly and lets you set your own spacing. The tradeoff is you need a junction box at each location rather than one centered box.

It carries a cETLus safety listing, which covers both US and Canadian requirements for inspection purposes. The body is steel with a matte black finish and a clear glass shade, and the whole fixture weighs 2.31 lbs, light enough to hang off a standard fixture-supported box.

No. It's a socketed incandescent-technology fixture with no integrated LED and no CCT selection. Color temperature is whatever A19 lamp you install, which is actually an advantage for property managers standardizing lamp color across a building, you set it at the bulb instead of being locked to the fixture.

It's a wall-mount fixture, and the clear cylinder glass means the lamp is visible either way, so orientation is an aesthetic call rather than a photometric one. Note you only have 7 inches of supply wire at the canopy, so leave enough slack in the box to make up your connections before you set the plate.

Matte black with clear glass is the configuration sold under part number 60-7101. There's one finish on this model, so if a project needs a different metal finish across the same collection, you're looking at a different Skybridge part number rather than an option on this one.

Yes, lead is the listed Prop 65 chemical for the Skybridge 60-7101. If you're shipping into California or submitting to an institutional procurement office, that disclosure needs to go in the package.