NUVO Lighting 60-7111 Skybridge, 1-Light, Vanity Fixture, Brushed Nickel Finish with Clear Glass

The Skybridge 60-7111 is an indoor fixture with a damp location rating, so it is fine on a bathroom wall above a vanity or mirror where it sees humidity. Damp rated does not cover direct water contact, so it should not go inside a shower or tub enclosure where a wet location fixture is required. It is cETLus safety listed.

It takes a single medium base (E26) A19 lamp rated up to 60W at 120V, and no bulb ships with the fixture, so order lamps separately. Dimming depends entirely on the lamp you install, so if you are putting it on a dimmer, pick a dimmable bulb. The fixture itself is specified as incandescent technology, but any A19 medium base lamp within the 60W rating will fit.

No. The Skybridge 60-7111 is not ADA compliant, and at 6.75 inches of projection it exceeds the 4 inch limit for wall sconces in ADA circulation paths. For a public corridor or an accessible restroom where the fixture sits in a path of travel, specify an ADA rated sconce instead. For a residential or multi-family unit bath above a vanity, it is not an issue.

The fixture comes with 7 inches of lead wire, which is normal for making up connections inside a standard wall box. It is a wall mount fixture wired for 120V, so it needs a recessed box behind it with conductors long enough to join at the box, not extended out into the canopy.

No. The 60-7111 is a lamp-based fixture with no CCT selectable switch and no integrated LED module, so color temperature is whatever A19 medium base bulb you put in it. That is useful on a property where you standardize bulbs: buy one 2700K or 3000K A19 and every fixture matches.

Order NUVO Lighting 60-7111 (printed by the manufacturer as 60/7111) from the Skybridge collection in brushed nickel. The brushed nickel with clear glass combination is the only configuration of this one-light vanity, so reordering the part number gets you an exact match to what is already installed.

It is a wall mount fixture with a single cylindrical clear glass shade. Clear glass means the filament or bulb is visible and the light is unshielded, which suits the industrial look but puts glare in sight lines at eye level, so it reads best mounted with the shade down beside or above a mirror. If you want diffused light with no visible lamp, a frosted or opal shade fixture is the better choice.

The body is steel in a brushed nickel finish with a glass shade, and the whole fixture weighs 2.31 lbs, so it is light enough to hang on a standard box with the supplied strap. Brushed nickel hides water spots better than polished chrome, which is why it is the common pick for multi-family turns. Clear glass will show dust and film and needs occasional wiping.

Yes. Lead is identified as a Prop 65 chemical for this fixture, so a warning applies for California shipments and for institutional submittal packages that require disclosure.