NUVO Lighting 60-7116 Skybridge, 1-Light, Mini Pendant Fixture, Brushed Nickel Finish with Clear Glass

The Skybridge mini pendant is a rod-mount pendant with a maximum overall height of 44.69 inches. It ships with two 6 inch rods and two 12 inch rods, so you can build the drop in increments and run shorter if needed. The fixture body itself is 8 inches high and 5 inches in diameter, and 144 inches (12 ft) of wire is supplied. For a standard 8 ft ceiling over a counter, the rod set gives you plenty of adjustment.

It takes one medium base (E26) A19 lamp up to 60W, and no bulb is included, so order lamps separately. The fixture is wired for 120V incandescent service. Dimming depends entirely on the lamp you install, so if you are putting these on a dimmer, specify a dimmable A19 LED or an incandescent A19.

No. The Skybridge pendant is rated for dry locations and indoor use only. Over a sink, in a bathroom, in a laundry area, or under any exterior soffit you need a damp or wet rated fixture instead. Dry rating also rules out unconditioned spaces where condensation forms.

It carries a cETLus safety listing, which covers both US and Canadian requirements. Note the rating is dry location indoor only, so it suits lobbies, offices, dining areas, and residential interiors rather than anything exposed to moisture.

Each Skybridge is a single-light fixture with one 5 inch diameter clear glass shade, so island runs are built by hanging multiples. The shade is a 5 inch diameter by 6 inch high cylinder, which is a small footprint, so most islands get three fixtures rather than two. Each one needs its own junction box and its own rod drop.

Yes, expect visible filament and direct glare. The Skybridge shade is clear glass, not frosted or opal, so the bare A19 lamp shows through. Over a seated dining table that can be harsh unless you use a low-lumen or filament-style A19; over a counter at standing height it reads as intended industrial styling.

Steel body in a brushed nickel finish with a clear glass cylinder shade, and the whole fixture weighs 2.42 lbs. At that weight it mounts to a standard ceiling outlet box without needing a fan-rated or heavy-fixture support.

The 60-7116 is the brushed nickel version with clear glass. That is the one finish combination offered under this model number.

Yes. The fixture is identified as containing lead under California Proposition 65, so it ships with that warning. That matters for institutional and government procurement paperwork in California.